Sicce pump cord

[Kevin@Nemos]

Anyone know what this connector is called? I'm looking to make a sicce pump extension cable. . I would like to find the female and male ends of it

 

[Ron Reefman]

Try looking at what these guys offer.

Hopkins 4WAY FLAT&7WAY ROUND MULTI TOW HARNESS 47185 | Zoro

Order Hopkins 4WAY FLAT&7WAY ROUND MULTI TOW HARNESS, 47185 at Zoro.com. Great prices & free shipping on orders over $50 when you sign in or sign up for an account.

www.zoro.com

 

[MartyK]

Are there any markings on the plastic of the connector? It's going to be extremely difficult to find the exact part unless you can find a part number, brand/manufacturer, or ask Sicce likewise. That does not look like a 4-pin round trailer wiring connector as those don't have dividers on the male side (male = pins, female = sockets) and trailer connectors are usually larger and heavy built.

If you want to browse, go to DigiKey or Mouser and take a look at all of the barrel connectors, 4-pin or 4-position, and try to find one that matches. There are thousands of options though.

 

[Chenko]

@Kevin@Nemos Hi.. did you ever figure this out? I am at a similar conundrum. Trying to hook this up to Hydros Kraken and need to make my own cable. Thanks in advance.

 

[mstgkillr]

Bump... I'm looking as well.

 

[reefermadnes5]

Use heat shrink butt splices and cut a part of the wires that DO NOT get submerged. Just cut and splice each wire into a heat shrink butt splice. You can lengthen any cord with this method.

 

[esquare]

Use heat shrink butt splices and cut a part of the wires that DO NOT get submerged. Just cut and splice each wire into a heat shrink butt splice. You can lengthen any cord with this method.

I went through this exercise a while back and couldn't figure out what connector it was. I didn't want to cut the pump cord but as reefermadnes suggests, it might be the easiest solution.

 

[mstgkillr]

Looks like I might have found the connector specs on Sicce's website (m16-4p), and a with a quick search I found what appears to be the connector.

 

[esquare]

Looks like I might have found the connector specs on Sicce's website (m16-4p), and a with a quick search I found what appears to be the connector.

That was quick, great work. If you move forward with this, please let us know how it turns out.

 

[NancyFish]

Looks like I might have found the connector specs on Sicce's website (m16-4p), and a with a quick search I found what appears to be the connector.

Did you have any update?

 

[Kevin@Nemos]

Nope, tired that connector spec. I ended up having to splice

 

[NancyFish]

Nope, tired that connector spec. I ended up having to splice

How hard was it to splice? I keep thinking it would be complicated but at the same time outlet wiring isn’t complicated

 

[Kevin@Nemos]

How hard was it to splice? I keep thinking it would be complicated but at the same time outlet wiring isn’t complicated

If you can cut, strip and crimp wire it's straight forward