Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
1- Enter in ContrAll – Settings and click on Factory settings;
2- Unlock the controller pushing shortly the central button, then reset it by pushing simultaneously the buttons ECO+PAUSE for 11 seconds (during reset time the blue led will light up and at the end it will switch off).
3- Unplug the pump, wait a minute and then power it up.
Then please try again the configuration procedure.
Thank you but I don't have the same controller. No exo button I only have plus and minis.not sure if will help but i found this from a fairly similar issue:
I submitted a case along with a photo of the serial number. Not 12 hours later it started working again for some unknown reason. Sicce got back to me and suggested I reset the system, but I never found the need to do that. Here are their ins