SithRico's RedSea Reefer 250

[Pongo]

Lookin' good, time to get that thing wet.

 

[sithrico]

While I'm waiting for the E marcos, I went ahead and plumbed up the first part of the manifold. I found that Amazon has the best prices for the clear primer and glue. I even got them same day free with prime. Thank you Amazon.

 

[sithrico]

Here is the plan I have so far for the manifold. Hope it works out like it does in my head.

 

[sithrico]

I get a weekend off this upcoming weekend. Hopefully, I can fit in a leak test, a manifold test run, Aquascaping complete and Easter. Looks like I will have a busy tank weekend. Fingers crossed.

 

[revhtree]

Cool video bro!

 

[Pongo]

Very nice manifold setup.

Mine looks similar except I used soft silicone tubing from the pump up to the manifold to help isolate vibration from the pump.

Time to get wet.

 

[sithrico]

Very nice manifold setup.

Mine looks similar except I used soft silicone tubing from the pump up to the manifold to help isolate vibration from the pump.

Time to get wet.

I keep trying to get this thing wet and then life happens. If The wife wouldn't schedule me up so much

 

[sithrico]

I've neglected to post any new progress.
The first leak test passed on all my plumbing work. Leaks at the bulk head that RedSea silicone to the glass. Called customer service and they said to just silicone and it should be fine if not they would replace the entire tank. I have the silicone drying so far for 2 days will test again tomorrow.
Second-I completed the Aquascape. Took it outside to rinse it off. It toppled over and broke....Ugh, I didn't let it set up for 24 hours like recommended. Redid and now just going to let it dry until I'm ready to fill the tank.
Purchased a Gyre 230, Apex controller and bio media. I will post videos of all my progress as well. Just need to edit and render first.
It's coming along slowly but surely.

 

[sithrico]

Updated the build list to what I have so far.

Equipment List for the Build.

1. RedSea Reefer 250
2. Return Pump Syncra Silent 4.0 Pump (951 GPH) - Sicce
   Changed to Reef Octopus Varios-4
3. VorTech MP10wQD QuietDrive Propeller Pump - EcoTech Marine
   Changed to Maxspec Gyre XF230 w/new controller
   I will get another XF230 down the road if needed.
4. ATO Osmolator Nano 3152 - Tunz Already own from previous build
5. Florida Reef Rock (50lbs - Free Shipping) - Reef Cleaners
   Got and additional 30lbs to have enough for the Aquascape if needed.
6. 2L Pond Matrix BioFilteration
7. 30 lbs bag Miniflakes (aragonite crumbs, 2mm)
8. Protein Skimmer Reef Octopus Classic 110INT 4” Internal Protein Skimmer
9. Lights Kessil Spectral Controller
   Purchased this not knowing I would receive an APEX, and can't return.
10. Lights Kessil A160WE Tuna Blue LED Light = 2
11. Lights A-Series Mounting Arm - Kessil = 2
12. BRS GFO & Carbon Reactor - Dual
    Changed to AQUAMAXX FLUIDIZED GFO AND CARBON FILTER MEDIA REACTOR - XS
13. Jebao Programmable Auto Dosing Pump DP‑4
14. Apex Controller System - Neptune Systems This is the 2016
15. Red Sea Reefer 250 ClearView Lid - Artfully Acrylic[/SIZE]

 

[Pongo]

How did the sump baffle repair go?

That's a nice list of equipment.

Is it wet yet??????

No pics = didn't happen

 

[sithrico]

How did the sump baffle repair go?

That's a nice list of equipment.

Is it wet yet??????

No pics = didn't happen

It's like I'm in the last mile of the marathon. Your right it's not quite wet. Just test water in it. I'm hoping to test again tomorrow. If all is good I'm hoping to have it running by the weekend. Fingers crossed.

 

[sithrico]

I made a Broadfield set up in the 250. It's 12 inches wide but plenty of room for controllers. I think the Apex will look nice on here.

 

[sithrico]

I tried another leak test and still a fail.
Here is the leak at the bulkhead on the overflow pipe. I did another round of silicone and going to try again tomorrow. Looks like I didn't make it all the way around. It's like a 4 mm gap I left. If this next round doesn't stop it I'll have to ask for a tank exchange.

 

[sithrico]

Found out I used the wrong silicone. Had to scrape it all off and try again. This is the 100% All purpose GE silicone 1 this all around. I think I don't got any leaks now. 24 hr timer start now!

 

[sithrico]

Got controllers mounted. Return-Gyre-Apex. Got to do some wire management and hide power bricks. The Cabinet is starting to look really good.

 

[sithrico]

Overnight leak test happened. Results are in. The overly done silicone job on the bulkhead is holding water back so far. Going to let the tank run all day and just keep watch. Need to purchase substrate, cables for the Kessil to Apex. A media bag, and Dr Tims One and Only. Lastly some DI resin for RODI. Getting to the home stretch to start the nitrogen cycle. Whooohoooo!

 

[Broadfield]

Getting close!!!

 

[JustAnt]

Got controllers mounted. Return-Gyre-Apex. Got to do some wire management and hide power bricks. The Cabinet is starting to look really good.

Looks good but where will you put you ATO water reservoir?

 

[HolisticBear]

Are you happy with the Varios? I'm considering the same model for a 170.

 

[sithrico]

Are you happy with the Varios? I'm considering the same model for a 170.

Yes, I am. It is super quite and if it wasn't for water movement I wouldn't know it was on. I have it set to only 1 right now during the water test and it is giving plenty of return with the reactor open more than what I need it to be. I think it will be plenty enough for your 170. I'm really glad I went with this one. Might even get another for my water station since it can work wet/dry. Came with all the attachments too. Big plus, it's "Apex Ready". Highly recommend.