Hello I’m having an issue after changing my filters my production is slow . I’ve also noticed my booster pump only kicks on when I shut my water off ?? Strange any help appreciate
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
YesIs this for an RO system?
Did you break-in the filters first? Usually they recommend running the carbon and sediment for 20-30 minutes, then flushing the RO membrane for x number of gallons - and then reconnecting whatever filters or add-ons after that.
It’s beflire the sediment fileWhere you you have your booster pump connected?
if just before the membrane, then sounds as if there is a blockage with the membrane.
Did you break-in the filters first? Usually they recommend running the carbon and sediment for 20-30 minutes, then flushing the RO membrane for x number of gallons - and then reconnecting whatever filters or add-ons after that.
If you just toss them in without flushing the fine particles of carbon that typically come out of new filters have more than likely clogged your membrane.I just tossed them in
Ideally you would use another flush valve instead of the membrane flush.There is a flush valve on there already I never thought to flush the carbon first . It makes sense . I’ll try that