Slowing down my wp-40

[JCSReefing]

I have a wp-40 jebao pump and tried putting it into my 40g im fusion new tank and it blows **** everywhere even on the lowest setting. Has anyone tried using a router speed controller to tune it down a bit??

 

[AZDesertRat]

Fish-street sells an adjustable power supply to reduce the speed.
That's a big pump for a 40. I have two WP-25s in my 5 foot 100G and they can pile sand at the opposite end if not aimed right.

 

[JCSReefing]

Fish-street sells an adjustable power supply to reduce the speed.
That's a big pump for a 40. I have two WP-25s in my 5 foot 100G and they can pile sand at the opposite end if not aimed right.

I cannot find anything on there site? What would it be called??

 

[pickupman66]

You can use any power supply that will provide between 12 and 24 volts. They have very little amp draw. When I purchased my first edition WP 40 I ordered an adjustable power supply. It worked well to be able to dial them in. I will agree that is way too much pump for that tank.

 

[AZDesertRat]

They have recently changed their website all around. I was on it a couple weeks ago and looking at them at that time. I want to put a WP-10 or RW-4 in my 16G nano with 3" of sand in it so I know it will need to be slowed down.
May need to contact them?

 

[dmax525]

I bought the aqualink wifi controller for mine and you can do a lot more adjusting with it.

 

[JCSReefing]

I bought the aqualink wifi controller for mine and you can do a lot more adjusting with it.

Where do I find this??

 

[AZDesertRat]

Here I found the adjustable power supply. I had to search their site for it.
http://www.fish-street.com/12v_to_2...cement_pump?search_string=12+24v+power+supply

 

[Bob Escher]

Boy I have two Vortech's MP10 on my JBJ 45 gallon attached to a Apex controller and I can't come close to running them full speed

 

[dmax525]

Where do I find this??

I ordered mine from eBay.