Walter Thomas
New Member
Can I build a 300 gal stand out of 2/4 instead of 2/6 ?
Stand
- Thread starter Walter Thomas
- Start date
- Tagged users None
Idoc
Getting lazier and lazier with upkeep!
Ultimate Member
Reef Squad
Excellence Award
MTRCMember
R2R App User
Hospitality Award
My Tank Thread
It would probably require a whole lot of 2x4 supports spaced closely below the top frame in order to limit sag...which would limit the size of the opening underneath to get to your sump. You're dealing with a tank that is going to have a weight around 3,000lbs. For a 300g tank, I would look into a steel frame to put my mind at ease.
The other thing to consider for this size tank is where you are planning to place it. If it is directly on a floor with a concrete slab underneath, you will be fine. But, if the tank is going to be on a floor that is raised with a crawl space or basement beneath it, you will require additional support under the floor/house.
The other thing to consider for this size tank is where you are planning to place it. If it is directly on a floor with a concrete slab underneath, you will be fine. But, if the tank is going to be on a floor that is raised with a crawl space or basement beneath it, you will require additional support under the floor/house.
mickeysreef <*))))<
Active Member
- Joined
- Apr 6, 2019
- Messages
- 391
- Reaction score
- 247
you might get away with 2/4s if you use thick plywood. it adds shear strength, that's how the tank manufacturers get away with cheap materials.
I'd personally use 2/6 though. hate to see a big investment lost
I'd personally use 2/6 though. hate to see a big investment lost
Similar threads
