I have a 210 gallon 72 x 25x 30 I use 3 MP40s 2 in sync on the left side one on the right anti sync. I am running the master at 75% alternating every 4 hours or so between constant and reef crest. I also ave a Vectra L2 return pump with 2 returns running at 75% the return pump flows through a manifold for my UV and carbon reactor I also have a lot of elbows which I’m sure cut down that flow by a fair amount. All plumbing is 1.5”. Is this too much? Too little? It’s an SPS dominant tank with some lps hammers 1 torch 2 goni and what not. The torch and Goni’s don’t extend very far but seem okay. The torch polyps seem puffy and short the Goni same thing. I figured the Goni and torch would extend much farther. The hammers are miserable lately. Parameters are all within normal limits. Nitrate 10 phosphates .07 - .1 Alk 8.0 salinity 1.025 all tested with Hannah checkers. Please excuse the fish they think it’s dinner time!