- Joined
- Feb 6, 2021
- Messages
- 289
- Reaction score
- 81
- Location
- Jamison, Pennsylvania
- What state or country do you live in
- Pennsylvania
Hey Guys,
I recently installed an aquamax sulfur denitrator. Actually it's their calcium reactor but the TS-1 has been out of stock for months so I just purchased the T-1. Same thing essentially.
I was also told I needed a feed pump so bought a sicce 0.5 with rodi hookup. Put it in the sump and good to go.
Noticed today the sicce pump is making a lot of noise. I have it currently at 1 drop a second and as the reactor medium matures I will increase the flow rate but there's always going to be a lot of backpressure against the pump. I have a feeling this noise is only going to get louder and fry the pump pretty quickly. Here's the adapter I installed. Was thinking I could also just drill a hole into the hose to allow some relief.
https://www.avastmarine.com/collect...ducts/sicce-pump-to-1-4-pushlock-tube-adapter
I was thinking of just installing a T in the return pump line and putting a rodi outlet there somehow. I have a Vectra S2 return pump. Looking at the spcs should be 3/4" fitting which seems right as the tubing is about 1".
Anyone have any idea how to T this line and install a 1/4" rodi insert? With the least amount of parts possible? Anyone ever do this?
thanks
I recently installed an aquamax sulfur denitrator. Actually it's their calcium reactor but the TS-1 has been out of stock for months so I just purchased the T-1. Same thing essentially.
I was also told I needed a feed pump so bought a sicce 0.5 with rodi hookup. Put it in the sump and good to go.
Noticed today the sicce pump is making a lot of noise. I have it currently at 1 drop a second and as the reactor medium matures I will increase the flow rate but there's always going to be a lot of backpressure against the pump. I have a feeling this noise is only going to get louder and fry the pump pretty quickly. Here's the adapter I installed. Was thinking I could also just drill a hole into the hose to allow some relief.
https://www.avastmarine.com/collect...ducts/sicce-pump-to-1-4-pushlock-tube-adapter
I was thinking of just installing a T in the return pump line and putting a rodi outlet there somehow. I have a Vectra S2 return pump. Looking at the spcs should be 3/4" fitting which seems right as the tubing is about 1".
Anyone have any idea how to T this line and install a 1/4" rodi insert? With the least amount of parts possible? Anyone ever do this?
thanks