Support Drain pipes

[Gladfelter]

What have you all used to support your drain pipes. I've got a 5.5 foot pipe running across my stand as it is drilled in the bottom.

Sent Via the R2R Forum APP

 

[FragDaddy]

can you flip the sump around and have it dump straight down in the sump? then no need for supports across the bottom of the tank

 

[jduck]

can you flip the sump around and have it dump straight down in the sump? then no need for supports across the bottom of the tank

+1 I would be worried about cracking the bottom of the tank with the weight of that drain pipe.

 

[Gladfelter]

There's two drains. So turning it around will only cut about 2 feet off the pipe. As it sits one long and one straight down and Im doing flexible tubing for return

Sent Via the R2R Forum APP

 

[Gladfelter]

The line goes directly under the center brace so I know I can tie it up with zip ties there but I would like something that would look better

Sent Via the R2R Forum APP

 

[FragDaddy]

Possible to just run Flex to the sump?

 

[redfishbluefish]

Make your own custom pipe hanger......two tees and a length of pipe. Cut one tee in half:

 

[KoleTang]

Make your own custom pipe hanger......two tees and a length of pipe. Cut one tee in half:

Nice! 1smile1

 

[Bow]

If you look in Home Depot in the plumbing section they have a bunch of different pipe hangers too.

 

[c_healy]

Loom clamps work good for me.

Sent Via the R2R Forum APP