Surprising cause of elevated TDS

  • Thread starter Thread starter Dom
  • Start date Start date
  • Tagged users Tagged users None

Dom

Theoretical Reef Keeper
View Badges
Joined
Apr 29, 2016
Messages
7,880
Reaction score
8,328
Location
NY
Rating - 0%
0   0   0
I have a bit of a Cyno problem in one of my tanks. This particular tank has a gravity-fed ATO system.

I tested PO4 and found that it is at 0.04.

As I prepared RODI for a water change, I tested a sample and found TDS to be at 80.

I watered the plants with what I made and flushed the RODI system for 10 minutes along with rinsing and drying the mixing basin.

After the 10 minute flush, my TDS reading came up ZERO, so I started making water change again. Several gallons into the new water, I tested TDS from the CLEANED mixing basin and TDS was still 80!

And yet, out of the RODI filter, it was ZERO.

Since it is a rectangular basin, I use an AquaClear 70 to circulate my water, which turns out to have been the source of the elevated TDS.

Who would have thought? I certainly didn't. But I was surprised to see what accumulated in the filter because I use it as an empty box and has no filter media... not even a sponge.

I'm back to using a submersible pump in the mixing basin.

Just thought I'd share.

Dom
 
So you were using a HOB filtration system full on with filtration media to circulate stored RODI?

I can understand water movement.but not understanding why you would filter RODI that's already 0 TDS = pure h2o

Good catch and glad you got it straightened out
 
So you were using a HOB filtration system full on with filtration media to circulate stored RODI?

I can understand water movement.but not understanding why you would filter RODI that's already 0 TDS = pure h2o

Good catch and glad you got it straightened out


It was one of those things where I needed to circulate new RODI during production and as a means of mixing salt to it. My submersible pump crapped out, so I hung the AquaClear 70 (a HOB filter) WITHOUT any filter media as I was only interested in mixing.

TDS was ZERO at all points until it touched the filter.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new