So realized my ATO was syphoning due to it being taller than my sump. My question is if I drill a hole in the ATO tube where I indicate in my drawing, will it reliably break the syphon?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
ATO to sumpIs water siphoning from the sump to your ATO or the other way around? If you drill a hole there I think you’ll spring a leak when the pump turns on
Im not worried about spraying. The ATO container is a 5gal bucket with a lid on i i notched for the tube and pump cord. Thank you!As already said you could drill a hole but water will shoot out when the pump comes on.
What you can do is install a T piece with a short hose pointing up and that will stop it squirting all over the place.
Or you could drill the hole you suggest but make sure the hole is pointing back into the ATO container so the spray goes down. That’s how the Apex ATK works if you use the anti siphon attachment.
I recommend lifting some of the line above the water line of your ato, that way your pump has to pump it uphill instead of down. Also if you have the exit port submerged then raise it slightly above the water line in the sump as well. Hope this helps reeferATO to sump