TCK frag plug

[jacksin]

Since I can't get a response from TCK, how the heck do I remove the post from the TCK frag plug. With most of the ceramic plugs i can just crush it in a set of vise grips to remove or cut with a dremel for the plastic ones. Have an encrusted pssamocora and want to just mount the disk portion
thanks

 

[Casual_reefkeeping]

Can you post a picture? I got a bunch of stuff from TCK a few weeks ago and they were on normal ceramic plugs. I usually use my bone cutters to snap the stem off.

 

[The Aquatic Arsenal]

You could also use a chisel and hammer

 

[rossco]

Mine look like plastic to me, I will be using my Dremel when the tome comes to mount them permanently

 

[chris k.]

I use a side cutter to snap off the stem, but it is a good size one.

 

[motortrendz]

Use a good pair of dikes. that's what I use for all post on the plugs.

 

[Softhammer]

Get yourself a pair of end nippers used for tile work. They are the perfect tool for any frag plug.

 

[rossco]

Correction, not plastic, looks to be ceramic

 

[K95ranger]

Hacksaw works good. Also used tile snippers too.

 

[TCK Corals Verified Sponsor]

Since I can't get a response from TCK, how the heck do I remove the post from the TCK frag plug. With most of the ceramic plugs i can just crush it in a set of vise grips to remove or cut with a dremel for the plastic ones. Have an encrusted pssamocora and want to just mount the disk portion
thanks

Sent you a PM

 

[jacksin]

Thanks, I have some tile nippers, didn't think of that.