There's something fishy about this build...

Dino’s cage setup. He’s temporarily outside.


IMG_9885.jpeg
 
Anyone got advice on mounting the frags?
Epoxy and Super Glue (cyanoacrylate).

You can also just use super glue and omit the epoxy.
 
Epoxy and Super Glue (cyanoacrylate).

You can also just use super glue and omit the epoxy.
If you have an urchin, I'd use the epoxy, too. They love frags.
 
If you have an urchin, I'd use the epoxy, too. They love frags.
Exactly. After rehoming my pincushions, the rate of falling frags has SIGNIFICANTLY decreased.

I only have one tuxedo urchin, which is harmless.

I’ve only been using super glue lately.
 
Exactly. After rehoming my pincushions, the rate of falling frags has SIGNIFICANTLY decreased.

I only have one tuxedo urchin, which is harmless.

I’ve only been using super glue lately.
Starry Blennies re-home frags frequently as well it seems. Although they typically leave the frag plug
 
I have mounted a frag before lol
I was asking for the pro tips not the beginners guide :face-with-tears-of-joy:

I stopped using epoxy because I find it flakes off after a few months. Prefer using a lot of super glue.
 
I guess my question is more on the plugs. Do you leave them on or try and remove at the base. I just saw BRS completely cut off the base of the coral which seems insane to me.
 
Last edited:
Mounted half of them and moved my two old and boring acros (the ones I never mention because they are boring).

Flame fox is I think my second favorite so far. Put it on some old epoxy I couldn’t get off.
IMG_1669.jpeg


Inland cyclops. Not a big fan of green but it is bright!
IMG_1670.jpeg


Shockwave is another favorite but it disappears in blue.
IMG_1671.jpeg


Finally the PC Rainbow is insane!
IMG_1672.jpeg


1. Rainbow
2. Fox
3. Shockwave (below, the wrasse is inspecting)
4. Cyclops
IMG_1675.jpeg
 
I can’t believe how insanely colorful this micromussa is though that PC Rainbow does give it some competition!
IMG_1676.jpeg


@JoJosReef Here’s my jumble of loose monti frags and I have two more sitting in the sand I need to add :rolleyes:
IMG_1668.jpeg


Unfortunately this coral has not recovered from the peroxide dip
IMG_1677.jpeg
 
I can’t believe how insanely colorful this micromussa is though that PC Rainbow does give it some competition!
IMG_1676.jpeg


@JoJosReef Here’s my jumble of loose monti frags and I have two more sitting in the sand I need to add :rolleyes:
IMG_1668.jpeg


Unfortunately this coral has not recovered from the peroxide dip
IMG_1677.jpeg
Lower it in the tank some?
 
I guess my question is more on the plugs. Do you leave them on or try and remove at the base. I just saw BRS completely cut off the base of the coral which seems insane to me.
I’ve done both. Same end result. I’m think the rational for snapping the plug is to prevent parasite eggs from hitchhiking.
 
Alk 9.9
Phos 0.07
Nit 41.6

Well the first two are good.
I don't know... I like #2 higher and #3 looks good, maybe a little higher?
 
With the alk close to 10, if that phosphate decides to bottom out you can end up with some RTN on the Acros. Also, Acros are gonna start using phosphates so I'd almost expect that to start dropping.
 
In my old tank it was pretty stable at like
A 7
P 0.4
N 5
So I guess this is better. Maybe the low nitrate was to blame for my softy and LPS struggles?
I'd imagine it sure played a part. Softies and LPS like nitrates for puffiness. SPS like phosphates.
 
With the alk close to 10, if that phosphate decides to bottom out you can end up with some RTN on the Acros. Also, Acros are gonna start using phosphates so I'd almost expect that to start dropping.
I’ll turn off the reactor then.
 

WHICH PART OF YOUR SETUP IS HARDEST TO REACH OR REMOVE FOR ROUTINE MAINTENANCE?

  • Glass behind or beside the tank

    Votes: 3 18.8%
  • Powerheads or wavemakers

    Votes: 2 12.5%
  • Sump or rear filtration chambers

    Votes: 2 12.5%
  • Skimmer or other filtration equipment

    Votes: 1 6.3%
  • Overflow or plumbing

    Votes: 5 31.3%
  • Lights or lids

    Votes: 0 0.0%
  • Mine is pretty easy to access!

    Votes: 2 12.5%
  • Other—tell us what I missed

    Votes: 1 6.3%
Back
Top
Home
Post thread…
Market
What's new