Thoughts on this idea for drain plumbing?

  • Thread starter Thread starter Seancj
  • Start date Start date
  • Tagged users Tagged users None

Seancj

Valuable Member
View Badges
Joined
May 7, 2017
Messages
1,371
Reaction score
1,448
Rating - 0%
0   0   0
Planning my tank upgrade. I want to avoid an internal overflow box for various reasons. I need the tank to sit as flush as possible to the wall so external overflows are not optimal either.
Thinking of running the drain (and return) plumbing directly through the back of the tank, through the wall, to the sump which will be in an unfinished basement area behind the wall.
Would this elongated Durso style drain work? How loud do you think it would be with longer horizontal section running through the wall?
Any other ideas?
Thanks!

Tank drain plumbing.png
 
Planning my tank upgrade. I want to avoid an internal overflow box for various reasons. I need the tank to sit as flush as possible to the wall so external overflows are not optimal either.
Thinking of running the drain (and return) plumbing directly through the back of the tank, through the wall, to the sump which will be in an unfinished basement area behind the wall.
Would this elongated Durso style drain work? How loud do you think it would be with longer horizontal section running through the wall?
Any other ideas?
Thanks!

Tank drain plumbing.png
This is how my LFS did one of there main displays when you walk in. Wanted the tank right up against a wall so they ran all the plumbing in the wall so tank would sit flush.

Couldnt really tell you about the noise since my only experience with this is at a LFS.
 
Not sure about the noise but having a single overflow can be a huge problem if it gets plugged up and you don’t have a backup drain to prevent a flood.
 
Not sure about the noise but having a single overflow can be a huge problem if it gets plugged up and you don’t have a backup drain to prevent a flood.
I asked my LFS about an emergency drain. The had the reef octo return that auto shuts off if water gets to low and drilled the tank low enough that it could hold water from the sump. They couldn't add an ato because of this but monitor salinity with Neptune and manually top off.
 
Not sure about the noise but having a single overflow can be a huge problem if it gets plugged up and you don’t have a backup drain to prevent a flood.
Agreed! I would have two of these, one on each back corner for that reason.
 
Was about to start a thread asking about the necessity of an overflow, but saw this.

Did you end up following through? What were your results?

I am considering coming up through the bottom straight up with a couple of drain pipes with similar setups. And probably an emergency drain that stays above the water line for just in case
 
Was about to start a thread asking about the necessity of an overflow, but saw this.

Did you end up following through? What were your results?

I am considering coming up through the bottom straight up with a couple of drain pipes with similar setups. And probably an emergency drain that stays above the water line for just in case
Not yet. I'm still looking for my next tank.
 

TOP 10 Trending Threads

HOW DO YOU USUALLY MOVE WATER DURING A WATER CHANGE?

  • Buckets

    Votes: 3 11.1%
  • A siphon or gravel-vac hose

    Votes: 0 0.0%
  • A pump and hose

    Votes: 5 18.5%
  • A dedicated mixing station

    Votes: 1 3.7%
  • A plumbed or automated system

    Votes: 4 14.8%
  • A combination of these

    Votes: 14 51.9%
  • Whatever container is clean at the time

    Votes: 0 0.0%
  • Water changes? We don't need no stinkin' water changes!

    Votes: 0 0.0%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new