yup!Ive mixed several different batches of this and at 1.026 the alk is about 7.6-7.8. Didn’t mix the bucket. Using salifert test.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
yup!Ive mixed several different batches of this and at 1.026 the alk is about 7.6-7.8. Didn’t mix the bucket. Using salifert test.
Do you think you might have diluted it a bit low or ie your SG is inaccurate? since the Ca is low as well? (of course the Ca could be measured inaccurate as well)My new bucket has a lower Alk 7.1 - 7.3 dkh @ 1.026 . Usually it’s 7.6-7.9 range . I stirred the mix for a few minutes and retested a new batch and got 7.6 ...still on the lower end. Hannah checker.
Calcium was also in the low at 380 ppm Hannah checker again so I can’t say the accuracy .
Do you think you might have diluted it a bit low or ie your SG is inaccurate? since the Ca is low as well? (of course the Ca could be measured inaccurate as well)
These tests are going to cause early heart attacks in all of usThought that as well so I recalibrated the Hannah digital salinity checker and my trusty old refractometer and the salinity is correct at 1.026 . My DT is also at 1.026
Tested my DT and got different numbers
Calcium 427
Alk 9.6
Mag 1440