Tube holder for 1/2 inch

  • Thread starter Thread starter reely989
  • Start date Start date
  • Tagged users Tagged users None

reely989

Active Member
View Badges
Joined
Nov 1, 2022
Messages
345
Reaction score
234
Location
Auburn
What state or country do you live in
Alabama
Rating - 0%
0   0   0
Could anyone 3D print me a tubing holder for a rimmed aquarium that could hold two 1/2 inch tubes instead of the traditional dosing tubing? Or would it be better to just use a couple of elbows?
 
@reely989 what are you trying to do?

I'm trying to run a closed loop to a reactor directly from my display since I don't have a sump. Thought was going to be using a sicce syncra .5 to pull water from the display, through an ozone reactor and back into the display.
 
I use these to hold return lines from reactors plumbed off the manifold in my sump. While they are adjustable, and do tighten, I "lock" them in using rubber bands. Super cheap, but relatively attractive and effective. I think I got them from ebay. Note: they were originally white.

20230215_095428.jpg 20230215_095432.jpg
 
Last edited:
I use these to hold return lines from reactors plumbed off the manifold in my sump. While they are adjustable, and do tighten, I "lock" them in using rubber bands. Super cheap, but relatively attractive and effective. I think I got them from ebay. Note: they were originally white.

20230215_095428.jpg 20230215_095432.jpg

Do you know what they are called by chance?
 
Do you know what they are called by chance?
Lemme see if I can find them in my purchase history. Gimme a few and I'll get back to you...
 
Also depends on how thick the tubing is - going 180 might be better for a fully rigid set of elbows as there are minimum realistic curvature to these things.
 
Also depends on how thick the tubing is - going 180 might be better for a fully rigid set of elbows as there are minimum realistic curvature to these things.

Yeah, that was another concern of mine. I'm not sure how realistic is is gonna be to get a decent radius on the curvature of these tubes. Elbows are starting to seem like the better option.
 
Probe holders work fine and have a 1/2” hole in them.. plenty of places make them or you could yourself out of acrylic or a screwdriver holder from harbor freight etc.
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 19 27.9%
  • I’d trust someone who knows my tank to choose

    Votes: 2 2.9%
  • I’d rather get a gift card and pick it myself

    Votes: 26 38.2%
  • I’d prefer gear or supplies instead

    Votes: 2 2.9%
  • Please don’t surprise me with livestock

    Votes: 19 27.9%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new