Two sumps

Teemingtank

Active Member
View Badges
Joined
Nov 22, 2018
Messages
311
Reaction score
181
What state or country do you live in
Michigan
Rating - 0%
0   0   0
Despite reading about the disastrous outcomes of running two sumps, I tried anyway. Just like everyone before me I failed miserably. I’d like to make my venture not a total loss and I was thinking of joining the two sumps via bulk head. I would like sump A (currently operational) to be connected to the supply and the end of sump B to house the return pump. Any recommendations before I go drilling holes in my sumps?

image.jpg


F7942D0D-F556-42F9-B675-DE1C8FA6581B.jpeg


61972F9C-4E20-436A-858C-7DC5F6F64860.jpeg
 
Despite reading about the disastrous outcomes of running two sumps, I tried anyway. Just like everyone before me I failed miserably. I’d like to make my venture not a total loss and I was thinking of joining the two sumps via bulk head. I would like sump A (currently operational) to be connected to the supply and the end of sump B to house the return pump. Any recommendations before I go drilling holes in my sumps?

image.jpg


F7942D0D-F556-42F9-B675-DE1C8FA6581B.jpeg


61972F9C-4E20-436A-858C-7DC5F6F64860.jpeg

Need another?? I think that's the same one?
15558025314295217425594086286856.jpg
 
The ultimate sump! There will be no stopping you. Lol... you should check out this guy rotter tube reef on YouTube. He connected 2 of his together to some success I believe. I'll see if I can link it. Don't know how much info he gives but he shows it set up

 
The ultimate sump! There will be no stopping you. Lol... you should check out this guy rotter tube reef on YouTube. He connected 2 of his together to some success I believe. I'll see if I can link it. Don't know how much info he gives but he shows it set up


I like that, I’m going to read the comments in a sec and see how much success he had. I know you need a similar water volume to make that work and I don’t think my sumps are terribly far apart in terms of volume!
 
The ultimate sump! There will be no stopping you. Lol... you should check out this guy rotter tube reef on YouTube. He connected 2 of his together to some success I believe. I'll see if I can link it. Don't know how much info he gives but he shows it set up


If a pump failed do you think the water bridge would siphon to the other sump?
 
Good question. I think it would depend on ur setup. If I were u I'd draw it out in a diagram and post it here to see what people smarter than me think!
 
Does it matter where I drill the bulkhead? I feel like the baffle in sump B will determine where the sumps level off.

CD26DE71-5BB6-44D4-98CA-ACE5D840BDEE.jpeg
 
Not sure what failed for you in running two sumps? I’ve run multiples many times. Either have one overflowing into the second (that is what I have now) or if on the same level you need a balancing pipe that effectively joins them as a single body of water. Simple physics really.
 
Not sure what failed for you in running two sumps? I’ve run multiples many times. Either have one overflowing into the second (that is what I have now) or if on the same level you need a balancing pipe that effectively joins them as a single body of water. Simple physics really.
One return pump was weaker than the other and it’s extremely hard to set the water height with 2 HOB systems. Essentially the weaker pump sump would fill and the other would empty. Could you maybe snap a pic of yours?
 
Just to clarify, my tank isn’t drilled and I tried to run 2 independent HOB overflows
 
whats the advantage of 2 sumps ovet just one long one?
My sump is only big enough for media. I can barely shove my skimmer in there!! Plus I’d like a fuge, I have seahorses in a different setup that could use any pods I can get. Also, if you have a small stand, 2 sumps is the better option.
 
It's a HOB simple set up. Super low flow rate pump into a breeder box and thru my chaeto compartment and overflows back out. Easy, inexpensive and space saver for ur sump. You can put it on the back of your tank or even on the sump if u really wanted. 20190420_135425.jpg 20190420_135425.jpg 20190420_171528.jpg
 
My sump is only big enough for media. I can barely shove my skimmer in there!! Plus I’d like a fuge, I have seahorses in a different setup that could use any pods I can get. Also, if you have a small stand, 2 sumps is the better option.

Just curious how you ended up on this. I've been searching for multiple sump threads and not coming up with much.

As to that video of the water bridge, in the comments he says "it works great" and then he says "until micro-bubbles accumulate and the thing breaks siphon". I have just enough experience with HOB siphon breaks that I will never ever go back there again. Microbubbles are real.

I am going to keep searching threads for tying systems together via gravity.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new