UNS R90

[maramotreef]

Hi Everyone.
Below is my Ultum Nature System R90 build. As you can see on one of the pictures, I have installed 8020 aluminum extrusion in the aluminum stand for my lighting. This looks a lot cleaner than any other light bracket out there and one of the advantage for having a aluminum stand as well.

Tank:
Ultum Nature Systems R90 Reef System
System Information (https://ultumnaturesystems.com/full-reef-system/)

Tank Specifications
• Dimensions: 35.43 x 22.05 x 22.05"
• Glass Thickness: 12mm
• Volume: 61.8 gallons
• Total Volume (Including Sump): 82.83 gallons

Equipment:
Light: Dalua X4
Return Pump: Great white return (Dalua)
Flow: (2) Great White wave maker (Dalua)
Skimmer: Great white GW12
Controller: Alkatronic Pro
Doser: Reefdose4
UV: Sicce UV-C Clarifier
Heater: BRS 300w Titanium
Rock: Real Reef Rock
Sand: Caribsea Fiji Pink Sand

 

[w00hz]

Love the cable management :face-with-hand-over-mouth:

jokes aside, looking forward to the build!

 

[JayRozzer]

Very nice. Following along, I’m looking at the same tank.

 

[Nano_Tuners]

Ive been eyeing one of these for a build down the road, following along

 

[Rookie2025]

How do you plan to plumb and locate the uv?

 

[iprayforwaves]

Were you able to move the tank and stand fairly easily when it was empty? I’m having one delivered tomorrow and placed where it will be staying, but I’ll need to get behind it to repair a few holes from the TV mount that was there before and touch up the wall paint.

 

[Rookie2025]

Were you able to move the tank and stand fairly easily when it was empty? I’m having one delivered tomorrow and placed where it will be staying, but I’ll need to get behind it to repair a few holes from the TV mount that was there before and touch up the wall paint.

I'll chime in because I had to do this too. The rubber feet make it hard to move solo but after putting it on furniture sliders it was relatively easy to move solo

 

[iprayforwaves]

I'll chime in because I had to do this too. The rubber feet make it hard to move solo but after putting it on furniture sliders it was relatively easy to move solo

Awesome, thanks for the info!

 

[maramotreef]

Were you able to move the tank and stand fairly easily when it was empty? I’m having one delivered tomorrow and placed where it will be staying, but I’ll need to get behind it to repair a few holes from the TV mount that was there before and touch up the wall paint.

Its easy but not sure with carpet though

 

[Ben's Pico Reefing]

Looking great

 

[Sharbuckles Reef]

Is it full yet? What did you end up doing for an aquascape?

 

[Noah Hertzing]

Hi Everyone.
Below is my Ultum Nature System R90 build. As you can see on one of the pictures, I have installed 8020 aluminum extrusion in the aluminum stand for my lighting. This looks a lot cleaner than any other light bracket out there and one of the advantage for having a aluminum stand as well.

Tank:
Ultum Nature Systems R90 Reef System
System Information (https://ultumnaturesystems.com/full-reef-system/)

Tank Specifications
• Dimensions: 35.43 x 22.05 x 22.05"
• Glass Thickness: 12mm
• Volume: 61.8 gallons
• Total Volume (Including Sump): 82.83 gallons

Equipment:
Light: Dalua X4
Return Pump: Great white return (Dalua)
Flow: (2) Great White wave maker (Dalua)
Skimmer: Great white GW12
Controller: Alkatronic Pro
Doser: Reefdose4
UV: Sicce UV-C Clarifier
Heater: BRS 300w Titanium
Rock: Real Reef Rock
Sand: Caribsea Fiji Pink Sand

I'm looking to make the same aluminum light stand as you on my R90. Could you provide the parts list you used to make yours?