UNS Tanks

[docscorals]

I’ve been looking at tanks to consolidate a couple of my nanos and also potentially to replace my Red Sea before my seems give out (plus I want to be able to get more tangs). Probably replace my Red Sea first (and upgrade it to a larger tank at the same time ). I was looking at Waterbox and UNS. I kind of like the style of UNS and their magnetic panels (I hate the hinges most of the companies have on their stands). Hoping to upgrade this fall maybe spring, but want some time to plan. Anyone with experience with UNS tanks have any feedback on their ease of set up and quality?

 

[commod0re]

I got my UNS R90 in March and absolutely love it. Everything is very high quality, I found setup to be really straightforward and no problem at all, and UNS support is really good plus they have some people on here (@UNS_Brandon @UNS_Parker)

 

[MichaelReefer]

I’ve been looking at tanks to consolidate a couple of my nanos and also potentially to replace my Red Sea before my seems give out (plus I want to be able to get more tangs). Probably replace my Red Sea first (and upgrade it to a larger tank at the same time ). I was looking at Waterbox and UNS. I kind of like the style of UNS and their magnetic panels (I hate the hinges most of the companies have on their stands). Hoping to upgrade this fall maybe spring, but want some time to plan. Anyone with experience with UNS tanks have any feedback on their ease of set up and quality?

Morning.

My Redsea 525XL seam failed after six years, I decided to go UNS about a month ago.

So far I absolutely love the tank. All aluminum frame (Super heavy duty compared to the garbage particle board ones), crystal clear glass, very well made. Customer service was amazing and easy to reach. The only issue I had was some of the rubber pads for the doors fell off due to the heat and having it in my hot, Central valley California garage for a day. I texted Parker, he sent me a bag with some new ones within a few days.

 

[docscorals]

I’ve been looking at tanks to consolidate a couple of my nanos and also potentially to replace my Red Sea before my seems give out (plus I want to be able to get more tangs). Probably replace my Red Sea first (and upgrade it to a larger tank at the same time ). I was looking at Waterbox and UNS. I kind of like the style of UNS and their magnetic panels (I hate the hinges most of the companies have on their stands). Hoping to upgrade this fall maybe spring, but want some time to plan. Anyone with experience with UNS tanks have any feedback on their ease of set up and quality?

How’s the sump in terms of workable space? Like skimmer, reactors, etc? Looks like you have a lot in there.

 

[MichaelReefer]

The sumps good, all the chambers have adjustable weirs to adjust water levels, glass is all bevelled and smooth so no knicks. Really the only downside to under the tank is there is no back wall to mount things. So you have to get creative. But I have a skimmer, Santa Monica Algae reactor, carbon reactor, return pump as well as lots of biological media in there and didn't have any problem fitting it. Mine is the bigger tank also though, so if you're wanting a 90, I would check with @commod0re for that. I believe the 90 is too small for the 500 Roller Mat, you have to get the 250 I think.

 

[commod0re]

Yeah reefmat 250 for R90 or a dual-unit Nature Dimensions N-Clear M is what I’m planning to put in mine

Decent amount of room down there, I have an oversize skimmer (nyos quantum 160), rocks and sand, return pump, several probes, dosers, dosing containers, the included ATO, and still have room for more. Not all of my electronics fit in the electronics section is my one real challenge lol

 

[docscorals]

The sumps good, all the chambers have adjustable weirs to adjust water levels, glass is all bevelled and smooth so no knicks. Really the only downside to under the tank is there is no back wall to mount things. So you have to get creative. But I have a skimmer, Santa Monica Algae reactor, carbon reactor, return pump as well as lots of biological media in there and didn't have any problem fitting it. Mine is the bigger tank also though, so if you're wanting a 90, I would check with @commod0re for that. I believe the 90 is too small for the 500 Roller Mat, you have to get the 250 I think.

I’m actually looking at the 180.

 

[MichaelReefer]

I’m actually looking at the 180.

Oh gotcha. Yeah Mines the 150. But I love it so far.

 

[VintageReefer]

I would take uns over Red Sea anyday

 

[Finn450]

I've done my research, going with UNS for my next project.

 

[UNS_Brandon]

I kinda want a R90S.

 

[Finn450]

R80CS is what I'm going with...Mangrove lagoon.

 

[Bear22]

Besides the regular vendors (eg., BRS) where are people buying their UNS aquariums?

 

[MichaelReefer]

Besides the regular vendors (eg., BRS) where are people buying their UNS aquariums?

My LFS ordered it for me.

 

[adapt13]

I saw that UNS announed a Peninsula V2 a ~week ago. The overflow looks very nice, but wondering if there were other changes.
One specific thing I'm looking to see is if the peninsula is "reversible" if I can place it behind a couch/against a wall and access the sump correctly.

@UNS_Brandon @UNS_Parker Not sure if either of you can provide any more info on the V2?

 

[UNS_Parker]

I saw that UNS announed a Peninsula V2 a ~week ago. The overflow looks very nice, but wondering if there were other changes.
One specific thing I'm looking to see is if the peninsula is "reversible" if I can place it behind a couch/against a wall and access the sump correctly.

@UNS_Brandon @UNS_Parker Not sure if either of you can provide any more info on the V2?

Hey, the change is the overflow is really the only change we made to the V2. Changes were made to the plumbing to accommodate for the smaller overflow as well.

As for the accessibility, there is a pre-determined 'front' to the sump and electrical cabinet (If looking at the system with the overflow on the right side) . You can still access the sump from the 'back', but the plumbing will be in the way. The electrical cabinet can also be modified to allow for larger openings in the back as well.

This is what the sump looks like from the back side.