Update 4, custom build tank

[Gabriel Trifa]

Hy all !!
Just finished sealing my tank 100x50x50 cm, 1 cm thick glass. I used injetion method with tape so i wont have to clean that much afterwards. I used 2mm thick zipties as spacers.
The wier is allready în place.
I will let it cure for 3 - 4 days, then i will run a 1 week leak test(let it stay filled with water).

 

[neil bharath]

nice did you put silicone on the bottom glass then pulled the spacers and then reapply? or when you pulled it did it spread?

 

[Gabriel Trifa]

nice did you put silicone on the bottom glass then pulled the spacers and then reapply? or when you pulled it did it spread?

I siliconed first the bottom glass, as i sealed the gap i pulled the spacers out