upgrading V2 to V2+?

Users Who Are Viewing This Thread (Total: 1, Members: 0, Guests: 1)

Devaji

5000 Club Member
View Badges
Joined
Aug 27, 2016
Messages
7,155
Reaction score
6,685
Location
Jackson Hole, WY
Rating - 0%
0   0   0
Hey Logan,
I was shopping your site trying to get my wish list down...haha I thought I saw a while back there was an option for upgrading the photon V2 to the V2+?

not that i am unhappy with the V2 was just wondering...
cheers
Deva
 
OP
OP
Devaji

Devaji

5000 Club Member
View Badges
Joined
Aug 27, 2016
Messages
7,155
Reaction score
6,685
Location
Jackson Hole, WY
Rating - 0%
0   0   0
Ok guys I went a head and gave it a go.
No Info on the web or instrustions so I thought I would do a write up. In the end it is pretty easy but with a little help it will make it supper fast.


Fallow at your own risk...

This is what your upgrade V2 to V2+ PCB chip will look like.
82a4c959e2eb22ff2b4f5631574c19ac.jpg
4eea10820b34d9aed49e6ab065b759bf.jpg
 
OP
OP
Devaji

Devaji

5000 Club Member
View Badges
Joined
Aug 27, 2016
Messages
7,155
Reaction score
6,685
Location
Jackson Hole, WY
Rating - 0%
0   0   0
Steep one:
Disconnect light from power - that should be a given.

Start by unscewing the small scews on bottom of light. 13 for each fan section. I have the 24" v2 So 26scres total.
I suggest putting them in a small bowl or cup.
cf3b84497a1265dbbb7d372ae0e1d1c2.jpg
 
Last edited:
OP
OP
Devaji

Devaji

5000 Club Member
View Badges
Joined
Aug 27, 2016
Messages
7,155
Reaction score
6,685
Location
Jackson Hole, WY
Rating - 0%
0   0   0
Step 4:

Unscrew grounding wire?? ( not sure what it is just guessing.) It's the yellow one.
once it's unscrewed you can remove it from the PCB board. there might be some red goo that holds it together but it does come out. the LED lens are easy to remove and put back so dont worry about that.

8b72f220804525235c7e8bf1a4d4f407.jpg
 
Last edited:
OP
OP
Devaji

Devaji

5000 Club Member
View Badges
Joined
Aug 27, 2016
Messages
7,155
Reaction score
6,685
Location
Jackson Hole, WY
Rating - 0%
0   0   0
Step 5:
Unscrew the bolts that are holding down the PCB board there are 2 of them.
The silver ones -finding this step took awhile never worked with electric boards before so it was a shoot in the dark.
fb06b4904cf9155c0a6d7c5e1439f12f.jpg
 
OP
OP
Devaji

Devaji

5000 Club Member
View Badges
Joined
Aug 27, 2016
Messages
7,155
Reaction score
6,685
Location
Jackson Hole, WY
Rating - 0%
0   0   0
Step 6:

Now that the screws are out you can left up the board to get you the plug on the right side. There is a red goo that is holding it in place. Take the end of your screw drive and cut it away.
And pull plug out.

a34a6a3908d57788b70678d50f529334.jpg
 
Last edited:
OP
OP
Devaji

Devaji

5000 Club Member
View Badges
Joined
Aug 27, 2016
Messages
7,155
Reaction score
6,685
Location
Jackson Hole, WY
Rating - 0%
0   0   0
Step 7:
Plug in plug you just removed in New blue board.
Make sure it's in there good. be mindful to get wires back on the right side of the light. out of the way.
1ca9f3e6109167bbdde791979d85d2a7.jpg
 
Last edited:
OP
OP
Devaji

Devaji

5000 Club Member
View Badges
Joined
Aug 27, 2016
Messages
7,155
Reaction score
6,685
Location
Jackson Hole, WY
Rating - 0%
0   0   0
Step 8
Attach the other plug that screws in to the yellow screw.

Place PCB board Back on heat sink, be mindful to line up holes for the sliver bolts that hold it in place.

Screw in sliver bolts that hold it in place.
f51008855483e57e5bf4a6ea56b7eeb8.jpg
9d053a35fd04f5a6b9f8ea29206477ea.jpg
 
OP
OP
Devaji

Devaji

5000 Club Member
View Badges
Joined
Aug 27, 2016
Messages
7,155
Reaction score
6,685
Location
Jackson Hole, WY
Rating - 0%
0   0   0
Step 9
Make sure all LED lenses are in place all wires look good and all connections secure and put back on top of light and sides.

Be mindful of the 8 flat screws they go on the ends.
39e2f09a182d713d9173350ff499f237.jpg
 
OP
OP
Devaji

Devaji

5000 Club Member
View Badges
Joined
Aug 27, 2016
Messages
7,155
Reaction score
6,685
Location
Jackson Hole, WY
Rating - 0%
0   0   0
Step 10 plug in and test!
Worked like a charm! Using new controller on old light. So now its a V2+
Will test that I can run both lights -older V2 just upgraded and brand new V2+ on same new controller tomoorw and report back.
7d0eab4e76c7f8e9f40e2e199b5987df.jpg
ee35e908ed17c0d61d31359f991a9341.jpg
 

Reef Breeders

ReefBreeders.com
View Badges
Joined
Dec 21, 2010
Messages
4,521
Reaction score
758
Location
North Kingstown, RI
Rating - 0%
0   0   0
Thank you very much for taking the time to make this write up! I will include a link to it in the item page for the upgrade kit if you don't mind.
 
Back
Top