Just a heads up that - while ICP testing can give you a lot of good information and are worth doing for many reasons - the test will not give you the oxygen levels of the water in the tank, which sounds like it's the most likely cause of the issue.
I would suggest adding in a practice (a "tank rule" if you will) of never having more than two of your three water movement vehicles off at the same time. So if the pump and skimmer are off, leave the power head on. If the power head and pump are off, leave the skimmer on. This practice of always leaving at least one gas exchange device running - if made habitual - can help to stave off mistakes down the road. Forgetting to turn things back on happens all the time (ALL the time around my tank), so being prepared for that is often an easier habit to establish than the (likely impossible) goal of never forgetting to turn things back on.
If ever you do need to turn all three off for some reason, set an alarm on your phone to remind you to turn everything on. I usually set this to go off in no more than 10min, since that's about the least amount of time I want my tank to sit idle if it must. I'm sure the tank can go longer than that, but the goal is to remind me to get them back on - even if that means clearing and resetting an alarm every 10min, it's better than the alternative.