Using Rowaphos or Phosban to Clear Aluminum & Silicates

Brent Bohannon

Community Member
View Badges
Joined
May 5, 2019
Messages
76
Reaction score
37
What state or country do you live in
Virginia
Rating - 0%
0   0   0
Does anyone know how long it takes for Rowaphos to clear Aluminum and Silicates? I also have some Phosban on order. Also curious if anyone, Randy, knows how much it can absorb before depletion?
 
What are the levels now?

Do you have a diatom problem?

Just because Triton says they are elevated does not mean they need to be reduced.
 
I assume that's a typo and its 316 ug/L.

That aluminum is quite high and may be an issue (I saw coral issues in my tests at 500 ug/L).

The silica is not an issue unless you have a problematic level of diatoms.

That high of aluminum, if accurate, is likely better dealt with by removing the source (such as white media) rather than trying to bind it.
 
Correct, typo. What do you mean by white media? The base to my RO Elite is white. The only media I use is carbon, bio pellets, and now rowaphos. I think the contamination is coming from my gooseneck for the AI prime. I just noticed it is severely rusted while doing some other maintenance. I am going to coat it all in silicone 1.
 
Correct, typo. What do you mean by white media? The base to my RO Elite is white. The only media I use is carbon, bio pellets, and now rowaphos. I think the contamination is coming from my gooseneck for the AI prime. I just noticed it is severely rusted while doing some other maintenance. I am going to coat it all in silicone 1.

It might be from corroding aluminum metal, but by white media I mean things like Phosguard from Seachem or MarinePure blocks . Any white porous material that is in the water, since that often is aluminum based.
 
The only stuff I use like that is x-port natural stone bio media balls. This is what I found. I have since sealed the holes with silicone. Sincerely appreciate the help.
 

Attachments

  • 86428C70-39EE-4BA3-AD8F-4C18E0361265.jpeg
    86428C70-39EE-4BA3-AD8F-4C18E0361265.jpeg
    103.2 KB · Views: 123
This is what I get for not just using crushed live rock. I’ll do another triton on Monday.
 
I just received ICP #2. After two weeks of rowaphos my Aluminum has dropped from 316 to 290 and silicates from 520 to 357. I pulled out the rowaphos just prior, as in an hour, to getting the results, because the phosphates are at near zero. My conclusions are that the rowaphos does work but removal of the media is a must. I will start that tonight with half of it and a water change. I think a giant warning needs to be posted about that media.
 
I just received ICP #2. After two weeks of rowaphos my Aluminum has dropped from 316 to 290 and silicates from 520 to 357. I pulled out the rowaphos just prior, as in an hour, to getting the results, because the phosphates are at near zero. My conclusions are that the rowaphos does work but removal of the media is a must. I will start that tonight with half of it and a water change. I think a giant warning needs to be posted about that media.

I'd personally conclude it is not a very effective or desirable method. If you keep using it, I'd dose phosphate or feed a lot more. Driving phosphate too low is likely a worse problem than either the aluminum or silicate.
 
I agree. I am going to let the tank go for a couple of months before the next ICP. We will see if the removal clears it up on its own with a water change.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 17.7%
  • Fish or coral food

    Votes: 5 5.2%
  • Test kits or reagents

    Votes: 10 10.4%
  • Filter media or replacement fleece

    Votes: 5 5.2%
  • RO/DI filters or supplies

    Votes: 15 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 12 12.5%
  • I keep a backup of everything

    Votes: 25 26.0%
  • Other (Post in the comments)

    Votes: 7 7.3%
Back
Top
Home
Post thread…
Market
What's new