- Joined
- Dec 31, 2015
- Messages
- 513
- Reaction score
- 172
I’m restarting my Reefer 350. I’m using a trigger platinum 26 sump and have already converted the plumbing to accept 1in pvc. I’m trying to figure out how to add a pentair UV sterilizer to the system. Main goal will be for algae but would like option to lower flow if possible for Protozoa if possible. Per BRS it should be the 25watt which is 29in x 3.5. Has anyone done this? I only have the 1 return. Should I plumb it into my primary return? Would it be ok to get a second pump and run it from the skimmer section to the return section? Will this cause issues with my skimmer section running dry and dumping too much water into my return? I plan on running this with an apex and flow meter.
I also need ideas how to fit it in the sump. It can’t be visible per the wife. Fitting it horizontally in the sump section will be tight. I could cut holes into the other side of the stand or maybe run it behind tank. Any help is appreciated.
I also need ideas how to fit it in the sump. It can’t be visible per the wife. Fitting it horizontally in the sump section will be tight. I could cut holes into the other side of the stand or maybe run it behind tank. Any help is appreciated.