Vortech mp40

[kp33]

Best way to clean algae of the Vortech mp40. Thanks

 

[The_Paradox]

Best way to clean algae of the Vortech mp40. Thanks

Depends on type. For coralline I would pop the guard off and soak in citric acid. For hair algae, turf, etc, tooth brush works fine.

 

[kp33]

Yeah is just everyday algae I believe.

Citric acid? Where do you get that?

 

[The_Paradox]

Yeah is just everyday algae I believe.

Citric acid? Where do you get that?

You can buy powder off Amazon dirt cheap. If you want it right this second most big box hardware stores sell it in the concrete section.

 

[reefbliss2344]

Hot water for a few hours to loosen the calcification then citric acid bath / scrub.

 

[kp33]

You can buy powder off Amazon dirt cheap. If you want it right this second most big box hardware stores sell it in the concrete section.

Is it powder at hardware stores or is it already liquid?

 

[The_Paradox]

Is it powder at hardware stores or is it already liquid?

I’ve seen it both ways in different sections. In the concrete section it’s usually powder as it’s used as a retarder.

 

[kp33]

I’ll check it out…is it better than vinegar?

 

[The_Paradox]

I’ll check it out…is it better than vinegar?

Faster and in theory a little safer.
If it’s soft algae though all you need is a tooth brush or a tooth brush and a little hydrogen peroxide.

 

[~MD~Reefs~]

You can buy powder off Amazon dirt cheap. If you want it right this second most big box hardware stores sell it in the concrete section.

Do you know if it’s called something else at big box hardware stores? I tried looking online at Home Depot to see if they carry it in stores near me and I can’t find it

 

[firefighterj80]

Do you know if it’s called something else at big box hardware stores? I tried looking online at Home Depot to see if they carry it in stores near me and I can’t find it

Should have it

 

[firefighterj80]

 

[kp33]

Not available in my area I just checked on HD site

 

[ca1ore]

I wouldn’t put the magnet assembly in acid of any kind. Torque off the nozzle, soak it in vinegar. Give the rest a good mechanical cleaning.

 

[The_Paradox]

MSDS/SDS even has LD50 marine invertebrate mortality rates. Apparently you should not dump more than 1.5g per gallon in your tank. :rolling-on-the-floor-laughing:

 

[reefbliss2344]

Hot water for a few hours to loosen the calcification then citric acid bath / scrub.

 

[Lavey29]

Haven't cleaned mine once in 3 years now.