Webserver

[Member No 1]

Is anyone having issues logging into the WebServer on the P4? ver. 7.24.

Using admin and the correct password.

Then this screen

Go thru the screen promps to this screen

Only to get this time after time. I've restarted the app. Tried different browsers. Happens on my Mac, and PC. I know I have connection, I can ping the P4.
I've also sent the error report.

 

[esther]

I just tried. No issues. Not sure what it could be. @Vinny@GHLUSA?

 

[Member No 1]

I just tried. No issues. Not sure what it could be. @Vinny@GHLUSA?

Esther, thanks for the info. I was hoping others were having the same issue.

 

[Member No 1]

I just tried pinging the P4.
No issues.

 

[ingchr1]

If those screens are coming up I think it's reaching the P4.

Maybe try cycling power to the P4 to see if that corrects the issue.

Maybe the webserver did not install correctly on the P4 and it needs to be reinstalled.

 

[Member No 1]

If those screens are coming up I think it's reaching the P4.

Maybe try cycling power to the P4 to see if that corrects the issue.

Maybe the webserver did not install correctly on the P4 and it needs to be reinstalled.

Thanks for the reply. I've tried the power cycle. Not sure how I'd go about reloading the Webserver.

 

[Ditto]

I agree with what @ingchr1 is saying try a power cycle and if that does not work then need to use the WiFi tool and update the webpages using the alternate method.

 

[Member No 1]

I agree with what @ingchr1 is saying try a power cycle and if that does not work then need to use the WiFi tool and update the webpages using the alternate method.

Ditto, I shall look into it. Just to be clear, the issue I'm having is logging into the local Webserver, not logging in with either myGHL or GCC.

 

[Ditto]

Download the Wifi Update tool within it will be instructions on how to perform the update with the tool. The Wifi-Module-ESP-Update-Tool is located here: https://www.aquariumcomputer.com/downloads/wifi-module-esp-update/

Once you have it downloaded unzip it and run the tool, a pdf is attached explaining how to do the emergency update.

 

[Ditto]

Ditto, I shall look into it. Just to be clear, the issue I'm having is logging into the local Webserver, not logging in with either myGHL or GCC.

This sometimes happens when the webserver files are corrupted. Were you able to use the P4 web Interface before and it just stopped working?

 

[Member No 1]

This sometimes happens when the webserver files are corrupted. Were you able to use the P4 web Interface before and it just stopped working?

Ditto, I shall try the WiFi tool. As to your other question, I've never been able to log into the local webserver.

 

[Member No 1]

***** UPDATE *****
Seems to be working now. Had to re-setup client, access point, and email notifications.
Thanks to all for the help.

 

[esther]

***** UPDATE *****
Seems to be working now. Had to re-setup client, access point, and email notifications.
Thanks to all for the help.

Doesn't it feel great when things work like they're supposed to?? :)