What size pump for a return do i need?

5altkreep · Nov 6, 2018

I'll quickly offer my .02

.01 if you have to dial back your pump, a gate valve will be easier to adjust than a ball valve.

.02 try to figure out a way to support your plumbing. What you have hanging there, by PVC cement,...I wouldn't be able to sleep if it were mine. Hate to see ya flood your house.

Simplicity Aquatics · Nov 6, 2018

My $0.02 as well. Turn over through the sump is not nearly as important as within the tank 500-600 gph is plenty, and you aren't going to get any more than that with your drains.

Why can you only fit a 3/4" pipe in your 1" bulkhead? Flow is greatly restricted based on length of the smaller pipe, meaning if you have 1 or 1.25" above and below the bulkhead you will get WAY more flow than a 3/4" drain all the way to the sump.

We also have pumps, with a 2 year warranty and US based support. Feel free to call us to discuss them.

roberthu526 · Nov 6, 2018

The Rio AC pumps are pretty good for the price. I used two for two years without issue.

mikes686 · Nov 7, 2018

I use a Simplicity DC pump it is adjustable and works the best out of several pumps in past.

DrewBrees713 · Nov 7, 2018

How do i go about supporting my plumbings? This is my first go at this and like you said id hate to come home to see Nemo plays fetch with my dog in the living room ;)

I had all sort of Rio pumps in the past, while they worked great, they didnt last long. Most crapped out in 12-14 months time.

5altkreep · Nov 7, 2018

Just take a walk through the plumbing section of home depot or any hardware store. You'll find different types of straps. May have to do a little engineering, but you should be able to make something work.