Which Gyre pump?

  • Thread starter Thread starter PSU4ME
  • Start date Start date
  • Tagged users Tagged users None

PSU4ME

Active Member
View Badges
Joined
Feb 11, 2013
Messages
446
Reaction score
298
Location
Boston
Rating - 0%
0   0   0
I have a 5’ peninsula and I’d like to get a gyre pump on the opposite side. Which do your prefer from a functional, longevity and maintenance standpoint?
Thanks!
 
Hi, I use 2 Gyre XF230 and 1 Gyre XF250 in my 180 cm peninsula aquarium. Since I don't know what kind of coral you have, I can recommend Gyre XF350 for use alone.
 
I prefer the maxspect versions, since you are only doing 1 I am also going with xf350. On my 4 foot tank I run 2 xf330 ramping up and down at a Max of 50% and can see the gyre effect move around the tank, I can do higher power but the bigger the turbulence the noiser it makes my overflow
 
Thank you. I’m interested in it because I don’t want the Tunze’s running to high and I want some crashing if the flow as well. It’ll be sps so the movement of the gyre flow will also be helpful!
 
also forgot to mention, i cant run both at 100% unless i want to be mopping up water from the floor.
 
I have two XF350's on my 5 foot tank, I got them for the same price as 330's, to be honest I wish I went with 330's as I do not run them past 30%
 
I’m worried about the magnets holding. My tank is 3/4”. Anyone how issues with that?

I don’t plan to run them on high speed, I think they’ll push plenty of water from what I read!
 
Mine are fine with 12mm glass, sorry cannot speak for 3/4.
 
Specs say .79" for the 350, my 330 is on .5" glass and it holds but it's a bit weak, not enough to worry me but I wouldnt try anything thicker.
 
Really? On my 4’ tank I run my xf250’s on 100%
I don't know what to tell you, it is pretty much in my post, I do not run them past 30% and wish I got the 330's.
I bought the 350's because I got them for the same price as what 330's would cost.
 
I don't know what to tell you, it is pretty much in my post, I do not run them past 30% and wish I got the 330's.
I bought the 350's because I got them for the same price as what 330's would cost.

My tank is also very very very full with a large mushroom box on one end, frag racks that cover the front glass, and rock covering the entire sandbed so that might have a lot to do with it. The tank swallows up flow easily
 
I have recently bought the Jeboa CP120 crossflow for my 4' 120G, and I'm pleased so far. Quiet and shifts a decent amount of water. No issues with flow to 4', I only run it at about 30-50% typically. They also have a CP-150 with more flow..
 
Fair enough, does flow change much from dirty to clean?
 
I run a single xf330 on a 3ft 75g display at 30%. Its plenty of flow. Powerful things.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 19.5%
  • Fish or coral food

    Votes: 5 5.7%
  • Test kits or reagents

    Votes: 8 9.2%
  • Filter media or replacement fleece

    Votes: 5 5.7%
  • RO/DI filters or supplies

    Votes: 14 16.1%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.5%
  • I keep a backup of everything

    Votes: 21 24.1%
  • Other (Post in the comments)

    Votes: 7 8.0%
Back
Top
Home
Post thread…
Market
What's new