acrylic

Hey fellow Reef2Reefers! I’ve been planning for my next build which will be a 36X36X20 cube lagoon SPS DT, and I'm torn between glass and acrylic. Initially, I was all in for low-iron glass, but a youtube video showcasing a stunning ¾ inch acrylic tank - exactly the size I'm looking for -...

The aquarium is a Fiji Cube 81g EXT The sump is a trigger triton 26 V2 Return pump is a Reef Octo Varios 8 Custom frag tank with rear wall discharge Custom blue PVC plumbing with unions and manifold to run auxiliary systems The stand is custom built and engineered to allow the sump and...

Trigger systems Ruby 30. Still in great condition.

Hey everyone, I have a 8ft by 2 ft by 12" tall Advanced Acrylics frag tank 1" thick for sale. Has built in ghost overflow and comes complete with all the racks. No scratches and was barely used and now resides in my storage. Has 3 1" drains and returns on each end. Asking $1000 obo. I'm located...

Hello, I was offered a 464 litre (about 125 gallons) acrylic cube tank (75*75*90 lwh [in cm]) for free, (tank is on its side in the photo).The tank is of course scratched, although the scratches are not deep and I think could be removed with some elbow grease. That of course then isn't my...

Has anyone ever made an acrylic tank with a bottom colored anything aside from the standard black clear white or blue? I have some spare sheets laying around solid orange, fluorescent orange, solid yellow etc. I was wondering if anyone had ever experimented with using other colors of acrylic on...

I have a 84Lx20Wx36H acrylic aquarium fully braced. All sides are 3/4 with top and bottom 1/2. I recently moved the tank witch it was purchased second hand. Now the tank is visible down the length of the aquarium and I can see bowing about 1/2in. Using a 4ft level across the front. It's very...

Ok, so bought an almost new IM120 from local hobbyists. As he was emptying, presumably because he emptied front chamber completely before emptying the back chamber, the acrylic separated from reinforcement glass wall behind it in three places (see pic for one such deformation). So, need to...

I've accidentally wiped an acrylic enclosure with 70% alcohol, externally and internally. It got some crazing on the inside and outside, and the acrylic got a hazy look. I knew beforehand that alcohol was aggressive to acrylic, but I would've never guessed that just wiping it with a small amount...

I've accidentally wiped an acrylic enclosure with a 70% Alcohol Solution on the inside and outside, and after that some crazing happened, and the internal surface got hazy. I knew beforehand that alcohol was not a good match for acrylic, but I thought that just wiping the surface with a little...

Hi Everyone! I received this acrylic tank for free - appx 35 gallons, drilled in the back. There's a significant amount of cracking in the front - does anyone know if this looks like normal crazing or if this is seam separation? Only the front corners have this, it's a 20x20x20 cube. The...

Made a bad bond today where kinda everything went wrong leaving a quarter-inch clear acrylic seam in a sump build littered with bubbles. looks awful. Is there anything that can be done at this point?

Up for sale is my freshwater setup. 100 gallon acrylic tank with stand and canopy. Fluval FX5 and 404. No leaks. Pickup only in Burbak, CA. $600 Not looking to part it out yet.

Good Morning All. Recently we bought a used 350 gallons acrylic tank. It has 1" think acrylic panels. On the side & back, it has additional black acrylic panels (may be 1/8 inch). I would like to remove the side black acrylic panels so that we can see from the side also. I tried to sanding it...

I’m looking to get an AIO chamber cover made preferably out of black acrylic so it looks good. I have a waterbox 20 and I would like it to basically just extend the back glass of my display and the sides of the AIO chambers by about 4” to help hide equipment and wires and also prevent algae...

Custom AIO acrylic frag tank with euro brace for sale, 30"x20"x12". Tank holds 30 gallons, comes with plumbing parts, eheim pump, two frag racks (160 frags). Tank is brand new, never been wet. There is a small blemish on the back right corner, purely cosmetic but barely noticeable. Can ship or...

WHITE PVC DRIP TRAY FOR SALE It's made from 1/2 inch white pvc It's 64inch long x 24inch wide x 4 inch high It was intended to be the "catch all" tray to sit inside my 6foot stand ( but the build was canceled) It's pvc, it's fully sealed at all the seams and holds water. Based on calculations...

67 gallon Custom Acrylic Aquarium for sale in Tampa, FL. $125. Dimensions are 48”x18”x18”. Three 1” overflows, two 3/4” returns.

Advanced Acrylics 4-Chamber Premium Dosing Container I only used briefly. 16x6x12, each chamber can hold little more than a gallon Locline bulkheads included, but looks like 3 of the 4 bulkheads need collets (or bulkheads replaced if you can’t find just the collet. They’re about 4$ea at Home...

Advanced Acrylics Custom 1/2" Acrylic AIO 20x16x14 (19g) Broke down my zoa garden tank, its only 6mo or so old, great condition. Custom built by Advanced Acrylics of CA Custom AIO 20x16x14 (19g) Thick 1/2" premium acrylic construction, 1/2" top eurobrace Rear chambers 1 (4x6) 2 (4x5.25) 3...

Massive Like New Aquarium 600 Gallons WILL DELIVER Within Reason 96*48*30 inches Acrylic Aquarium Minimal Scratches Custom Welded Stand 51 inches tall can be shortened to desired height Center Overflow can be used against a wall normally or as a peninsula or as an island. 100% Ready to...

Advanced Acrylic ATO/Dosing Container/Custom Premium 18g Nano Tank (ALL EXC/VERY LIGHT USE) All items in excellent condition and very lightly used for a few months. No leaks/major scratches/etc. Sorry these items available for local pickup (DENVER CO) only - no shipping due to size. Advanced...

Hello! I just got into the hobby. Decided to save some money and build an acrylic tank. My tank is 36x24x12 (lwh). I have attached some pics as well. Before I add water and start cycling, I was wondering if anyone has any experience building acrylic tanks. I wanted to know if one brace across...

Hey guys, I’m getting ready to plumb my 310 gallon tank and IceCap 48XL sump, was wondering if anyone has this sump and has considered modifying it for more water volume and if it’s possible and if so how difficult it is or how easy it might be to accidentally screw the whole thing up. The...

Saltwater fish guy who has been in the hobby for 55 years. I am replacing a 120 with a new 120 ACRYLIC with the following: over the top overflow (no water line at top of tank but... introduces a new, minor problem). added 1-1/2" acrylic walls around the openings in the top to guide the water...