overflow

Hey everyone! I'm upgrading my entire reef system to a larger tank, and have some lightly used equipment for sale. I'm looking for local buyers before advertising on the selling forum. Here's what I have pictures of right now: Apex Classic controller system, extra EB4, and Apple AirPort...

Hello everyone I would so greatly appreciate if anybody can locate somebody or website that sells just the aqueon megaflow overflow boxes, I have the accessory box I JUST NEED THE OVERFLOWS THEMSELVES. I bought a used tank with these in it but they are in bad condition and I want to replace...

I have a 30 gallon reef that I want to add a 20H sump on. The tank is currently drilled with 3/4” bulkheads and I was wanting to know if I could SILENTLY run a durso drain pipe down to my sump?

This is from another post I started but hopefully someone can help me figure out a solution to this issue with my overflow not working:

I want to add some additional water volume, better filtration, and a safe place to grow some beneficial algae to my "all in one". I am running into some issues trying to figure out a good way to get the water from my tank to the 10G that will be sitting below it. The picture below shows how...

Selling a 24-inch CPR Retrofit Overflow Box with Lid (full four-sided, acrylic box with molded weir) - New In Box from BRS - No Damage to Box - Bulkheads Included (qty 3 - 1” Bulkheads with gaskets) BRS Part Numbers RSS24DX - (Up to 1600 gallons per hour) RSS24 - EXTRA LARGE LID BRS lists...

I need help. So I’m setting up the plumbing for my 40 gallon tank. I’m upgrading my canister filter to 10gallon diy sump. After testing the water flow today. I realized my Rio 12HF flow is tooo strong. There’s wayyyyy more return water flow than the overflow. Which ends up running the last...

I have a standard Lifereef single overflow, silencer and spare siphon tube. These are made in Colorado and are of the highest quality. The overflow was purchased new for $129, the silencer was $19 and the spare siphon tube was $13. I used this with great success until I purchased my new tank...

Looking for a external overflow as my tank is tempered and i cannot drill. (40 gallon breeder) Preferably 2 pipes. If you are someone or know someone who can make one/makes them pm me and we can talk

Hey R2R members I'm going to set up a 40 gallon breeder tank for frogfish and have a few other tanks, none of which have sumps etc, that being said I'd really like to do this one "right". I'd prefer not to drill the tank, and would rather use a HOB overflow, but have heard of them being a key...

Hello I just setup my ghost overflow and it runs super quiet when my powerheads are off, but as soon as the vortechs reach about half power the rear overflow box starts surging. I setup the overflow exactly like the video shows. Iv tried running less flow through the overflow thinking maybe the...

I started my first saltwater tank in January of this year. It is a 20L with a DIY AIO filter. I built my own stand and made sure it was large enough to eventually upgrade to a 40B if things went well with the 20. Well I have been waiting for a $1 per gallon sale for weeks and finally got my 40B...

I have been running a 120 gallon reef-ready reef tank for the past 6 years. For all of this time I have been running with the drain kit that can be bought in addition to the tank. I have switched up the plumbing underneath the tank multiple times but it has always been one durso in each...

We're about to start plumbing the sump to the tank. Build thread here. The tank is a peninsula with dual synergy reef 16" overflows. To keep things neat, I wanted to terminate the return on the same end as the overflow. Is that a problem? Will the overflows just suck in everything coming out...

Guys, I need an experts advice on the method I am planning to do on my future tank for overflow. I am a newbie and need guidance: I am planning to go with herbie method, I have a tank that I dont want to drill, I am planning to have a tube going from main tank (placed high) to the sump with...

Hello R2R. First post here, however I have been following the forum and researching certain topics in anticipation for my reef build for a while now... which leads me onto my newly acquired tank. I found a quarter cylinder 60 gallon 1/2" acrylic aquarium for a sweet deal on Craigslist. It was...

I recently set up a new 83 gallons tank. The overflow is making a lot of noise from the air hole on top and splashing water sound in the sump. I think this overflow is call Herbie. I use a sicce 3.0 as a return pump and the only way I was able to somewhere reduce the noise was to slow the...

Hello All! First post here, but have been reading for a while. I'm struggling with the beananimal overflow plumbing. I had a spare 30gal and 10 gal tank in the basement and decided I wanted to set up a quarantine tank and practice (read:learn about) the beananimal system and fluid dynamics as I...

Hey guys, I follow the team on a lot of different outlets, R2R, Youtube, Instragram, etc. I noticed a post on Instagram from you guys on May 12th showing someone drilling a tank after its already been setup and running. https://www.instagram.com/p/BUATRvqD-SO/ It would be great to see how you...

This is for a 15g frag tank i am planning out. This is what i have planned. i plan to have 4 inches of space in between this panel and the back of the tank so there is plenty of room. The total height of the panel should be about 12" and the height of each baffle will be 11", giving a 1 inch...

I'm in the process of setting up a 180 gallon FOWLR tank and have a question about the dual overflows. I currently have a Marineland 93 gallon rimless RR Cube tank. The 180 that's replacing it has the same stock drains as the cube tank, just 2 of them. I was wondering if anyone has any...

Hi all, I just installed an external fuge onto my 75 seahorse tank and I'm getting a slurping noise. Right now I have a pump putting in water and a single overflow removing water after a single baffle. It seems the water level continues to fluctuate after the baffle and it periodically makes a...

Hi all. I'm keen to set up a gravity fed pvc pipe coast to coast weir overflow for my new 250litre tank. (very similar to the setup in this video: ). I have a couple of questions and any comments will be hugely helpful. 1. Will 25mm (1inch) pipe and bulkheads be sufficient if l have a 1...

Hi, All - I'm upgrading and tossing my Aqueon ProFlex, apparently too much flex as it has begun bowing over the years and swear the stand is damp on colder days, but can't find the leak. Having a hard time deciding which Trigger Sump I'd like to go with, Emerald 26 or Ruby 30. Here is my...

I just setup my first tank with a sump. It was my first time plumbing, etc and I'm super scared that something is going to fail or falter. so what is the right way to use an apex to monitor for leaks, potential overflows etc. I really have no idea where to start other than with the FMM with some...