overflow

Hey! So I went a lil coral shop based out of a storage unit, and I found a great buy. A 25 gallon cube rimless, on a stand, with a sump. Only problem was the leftover dirt and grime. Anyways! I cleaned it up, and I’m wondering what oveflow box should I do? I’m wanting an internal overflow, and...

Came home from my first day back at work after a blissful week long vacation leading up to Christmas, only to find that my HOB skimmer has somehow malfunctioned today. During the process it created a siphon and poured about 5 gallons of saltwater onto my living room floor, which then proceeded...

I am working on putting together a new frag system. It will consist of a 40-gallon breeder and a Bashsea Smart Series sump. The sump has three 1.5" drain connections, which is helpful as I intend to use a Bean Animal configuration. However, that is where I need your assistance as I decided to...

This is a photo of my rig. The foam is down now because we turned it off for a few minutes, but the foam eventually bubbles up and overflows. We have a hardwood floor so we're in a real pinch and the member of the family who maintains the tank is out of town! Any ideas?

Hello, So it's been quiet a while since i started my 100G setup... Tank is a CadLights Artisan 100G, comes with Durso stand pipe drain, that has 1x 1.25" drain pipe, and 2x 0.75" pipes one for emergency drain and one for return. My water height is almost at halfway through the teeth of the...

Hi Everyone! I've been into SW for about 4 years now, but I've only had All-In-One tanks. I recently set up a 60 gallon marineland cube with a sump system. I've been nervous about doing a sump system for a while, because it felt really complicated. Here are my tank specifications: 60 gallon...

Hello everyone, I finally became a member today. I have been keeping a reef tank for 2 years with the full support of my hubby. I have been reading the posts here and some info online with regards to the set up. I now plan to build an 8ft tank Stan and order a dt and sump and just do the...

Hello all, So I finally bought what will be my 1st SW aquarium. It’s a 90 gallon with a single corner overflow. The default plumbing it comes with is two holes for bulkheads; A Durso, then a return from the second bulkhead. My question is; would it be better to plumb the single Durso and the...

I recently bought a drilled 125 and would like to build a sump/refugium under the tank. An overflow box is included that fell off the back of the tank so I cleaned all the old silicone off and plan to reattach it. Before I do, I want to get a good understanding of how the plumbing will work as...

Purchased a new 125 Aqueon Reef Ready Tank. I see there is two plastic pop out slots on each mega-flow for which you choose which side the returns are on. So fellow owners, What is the best side to put the returns with loc-line? the outerside (towards the glass) or the inner side (closer to the...

Hang on the back overflow with 2 bullheads. Little scratched up but no leaks or cracks. $60 shipped to 48

Hi guys This week I noticed some saltcreek on the bottom frame at the back wall of my tank, and first though the seams were giving, but it's actually the Shadow Overflow leaking through the bulkhead. Today I pulled water out of the tank, removed the inside box of the overflow and the 4 gaskets...

How to Stop Your Protein Skimmer from Overflowing PLUS: Enter the Photo of the Month Contest presented by Marine Depot!

I've recently installed a sump and HOB overflow to my system and it has been running flawlessly for about 2 months now. Suddenly today, the water level is extremely high in the display. Another 1/4 inch and it will overflow. I havent adjusted the overflow or return pump at all since it was...

Hi all, My skimmer has been overflowing/going crazy for over a month at the recommended height of 9.58in. Playing around with it I've found that if I raise it to around 5-6in water height it will operate with the bubbles right where they should be. Initially I thought I might build some legs...

@NaH20nerd I finally got the package! First impressions are that this thing is built like a tank. One thing I know I'll like better is being able to see into the internal box. The Tideline overflow had the removable weirs. When you remove the weir / cover the bottom of it is about an inch and...

Hoping to find an overflow in the 300gph range. Any old Eshopps or Cprs out there?

Hi all, So I'm having problems with my skimmer in my first reef tank. I have a well cycled algae growing (maybe some coralline) 5x2x2 mixed reef; sump with internal skimmer and fuge. Current population: 6 fish, 4 LPS frags, 1 Mushroom frag, 2 stars, 3 emerald crabs, and a snail cleanup crew...

Hey folks! Hope all of you had a great holiday. I am giving this another go on a few items I have that are extras or that I no longer need. If you are in the Chicago area, we can arrange meeting for pick up vs shipping. 1) Eshopps PF-Nano Overflow Box with InTank bracket for overflow box ...

I’ve been considering how best to plumb the dual overflow/return on my center drilled 150gal build and I need some input from you knowledgeable reefers out there: Is there any reason I couldn’t pipe both of my overflow down tubes through two algae turf skimmers? In theory this would mean all...

Lifereef Overflow (full size) w/standpipe - former owner made standpipe This design is recommended for aquariums up to 48" long or flow rates up to 600 gph.

Lifereef Nano overflow - $65 shipped cont US Perfect for small reef or fish aquariums and BioCubes, any nano tank. Flow rate up to 400 gph (and anything in-between 0 and 400 gph) In other words it will flow whatever gph you give it up to its maximum rate. Outer box: 5" x 3 1/8" x 9" high...

A few days ago I started hearing a whistling coming from the pipe in my corner overflow that goes to the sump. There is a small hole in the top and if I cover it with my finger, the noise stops and the water level in the overflow lowers quickly but stops after about 5 seconds. I am not sure...

I bought a ReefSavvy 21" ghost overflow that flows 2400 gph for a new aquarium build I'm doing. Of course, my plans changed. It's brand new and was never installed. ReefSavvy doesn't accept returns, so my loss your gain. To get all the info on the overflow, Google: "reef savvy ghost overflow...

Setting up an HOB overflow box and return pump from sump The stand is 38” high + 22” tank high -> roughly 5ft high Overflow : ESHOPP PF-800Gph for 70G tank Question on return pump: Should I choose oversized pump? The height will effect the power, what pump should I use Return pump: SYNCRA...