0.00 nitrates + AFR dosing

fernandodal

New Member
View Badges
Joined
Jan 12, 2018
Messages
11
Reaction score
1
Rating - 0%
0   0   0
Hi everyone,

I'm posting to ask for some help with my 25-gallon nano reef.

My parameters show Nitrates at 0.00 (Salifert) and Phosphates at 0.26 (Hanna). I mainly keep LPS. I do a 20% water change every two weeks and run an algae scrubber for 10 hours a day. For alkalinity and trace elements, I use Tropic Marin All-For-Reef (AFR).

Lately, cyanobacteria has completely taken over the scrubber, replacing the green hair algae, and it's now starting to show up in the display tank.

To raise my nitrates, I've been dosing Refine, but the bottle is almost empty. I was planning to switch to a DIY sodium nitrate solution using a recipe I found on the forum, but here in Europe, food-grade sodium nitrate isn't available for sale to individuals.

Given that I'm dosing AFR, which nitrate source/alternative do you think would be best? Calcium nitrate, potassium nitrate, or something else?

Thanks in advance for any advice!
 
Can you find either calcium nitrate or bakers ammonia (ammonium bicarbonate)?
Yes, those are available in food grade.

Which one would you use combined with AFR? Or maybe both? Calcium Nitrate to increase levels eventually just in case nitrate drops near zero again and ammonium bicarbonate for daily dosing.
 
@Randy Holmes-Farley this might be the right time to ask. Do you think it makes sense to switch to something like 3-part for a while for OP due to the carbon dosing effect of AFR? I could imagine those cyanos are appreciating the extra carbon (even if the can use inorganic carbon).

I was always wondering if it makes sense to switch for a while when problems arise to keep organics low.
 
Last edited:
Yes, those are available in food grade.

Which one would you use combined with AFR? Or maybe both? Calcium Nitrate to increase levels eventually just in case nitrate drops near zero again and ammonium bicarbonate for daily dosing.

Both are fine. I use ammonium bicarbonate.

Calcium nitrate is a balanced alk and calcium additive and ammonium bicarbonate adds neither (perhaps surprisingly to some).

Both as you mention is a fine idea.
 
@Randy Holmes-Farley this might be the right time to ask. Do you think it makes sense to switch to something like 3-part for a while for OP due to the carbon dosing effect of AFR? I could imagine those cyanos are appreciating the extra carbon (even if the can use inorganic carbon).

I was always wondering if it makes sense to switch for a while when problems arise to keep organics low.

I don’t really know if there’s much nitrate reducing effect from formate, since it is nearly fully oxidized already, but yes, that’s a fine idea, as is just sodium bicarbonate since the AFR may have (or will) push calcium a bit higher already.
 

TOP 10 Trending Threads

IF YOU HAD TO OPERATE EVERYTHING ELSE MANUALLY, WHICH AUTOMATED SYSTEM WOULD YOU KEEP?

  • Auto top-off

    Votes: 47 56.0%
  • Automated dosing

    Votes: 6 7.1%
  • Mechanical filtration / roller filter

    Votes: 4 4.8%
  • Automated water testing

    Votes: 3 3.6%
  • Automatic feeding

    Votes: 1 1.2%
  • Lighting schedule

    Votes: 15 17.9%
  • Controller and remote monitoring

    Votes: 3 3.6%
  • Leak detection and emergency shutoff

    Votes: 1 1.2%
  • Automatic water changes

    Votes: 3 3.6%
  • None. I prefer to operate everything manually

    Votes: 0 0.0%
  • Something else (explain in the comments)

    Votes: 1 1.2%

New Posts

Back
Top
Home
Post thread…
Market
What's new