- Joined
- May 21, 2019
- Messages
- 166
- Reaction score
- 101
Hey guys:
Trying to figure out the best way to plumb my new to me aquarium.
Details:
120G with two corner overflows
each over-flow has a 3/4" and a 1" hole
The return has its own holes drilled along to top of the tank
What I'm thinking is using a Herbie method overflow system. The 3/4" on each side would be the main siphon, with a gate valve on each. Then the 1" would be the emergency overflow.
Also, the sump will be one story down in the basement, so the gate valves would be easiest placed near the tank to make adjusting easier, but is that going to work ok?
Thanks in advance!
Trying to figure out the best way to plumb my new to me aquarium.
Details:
120G with two corner overflows
each over-flow has a 3/4" and a 1" hole
The return has its own holes drilled along to top of the tank
What I'm thinking is using a Herbie method overflow system. The 3/4" on each side would be the main siphon, with a gate valve on each. Then the 1" would be the emergency overflow.
Also, the sump will be one story down in the basement, so the gate valves would be easiest placed near the tank to make adjusting easier, but is that going to work ok?
Thanks in advance!