125 - Took Forever But Here It is!

Brown noser
Uh Huh Reaction GIF by Originals


That's the game.
 
Hey Tim, on that pico acrylic build we did what is the size of that bulkhead? i have to get something for the return pump and i cant figure out if its a half inch or what. i know its threaded on the tank side and slip on the pump side. probably going with lock line just need the size.
 
Hey Tim, on that pico acrylic build we did what is the size of that bulkhead? i have to get something for the return pump and i cant figure out if its a half inch or what. i know its threaded on the tank side and slip on the pump side. probably going with lock line just need the size.
Yours the right one? Mine is half inch thread but it's backwards. Thread on the sump side, slip on the front side.
 
Just reread, you got the correct one. Half inch slip on the sump side so you'll need half inch PVC pipe size, not the coupler size (I'm assuming that makes sense to you since you're fairly mechanically inclined).
 
Hey Tim I know you have a thing for Blastos. I’ve finally kept one that looks happy.
IMG_4558.jpeg
I have that one but it's currently dying. My Merlettis are doing swell though!
 
I have that one but it's currently dying. My Merlettis are doing swell though!
IMG_7978.jpeg

The dead part is where my nem sat on it….

Do you know a good nem trainer mine are getting unruly with all this moving around IMG_7989.jpeg IMG_7990.jpeg
 
Well….you know the song “these tentacles were built for walking and and walking’s what I do…”
Seriously though, my black widow split soon after moving tanks. The second one was content to hang out next to the original for months…then it started moving. Stung part of a red hulk Monti whee it landed underneath a frag rack. When I took the rack out I managed to get to release and tried to put back in its original spot. That lasted 2 days and now it’s sulking just visible between two rocks.
 
Just reread, you got the correct one. Half inch slip on the sump side so you'll need half inch PVC pipe size, not the coupler size (I'm assuming that makes sense to you since you're fairly mechanically inclined).
THANKS! thats what i thougjt just needed to confirm. I need the 1/2 inch threaded for the non sump side. Need a nozzle of some sort to increase the flow.
 
Seriously though, my black widow split soon after moving tanks. The second one was content to hang out next to the original for months…then it started moving. Stung part of a red hulk Monti whee it landed underneath a frag rack. When I took the rack out I managed to get to release and tried to put back in its original spot. That lasted 2 days and now it’s sulking just visible between two rocks.
The one that was on top of my arch a picked up and moved back to the other side. This hopefully keeps them from becoming wavemake food. I have the guards but if they make it all the way over there they will be on top of Goni island and we can’t have thT
 
Man... Maintenance has been slacking on this tank lately. I need to clean the glass
 

TOP 10 Trending Threads

WHAT KIND OF SUBSTRATE ARE YOU RUNNING ON YOUR TANK?

  • Bare bottom

    Votes: 7 17.1%
  • A shallow bed of fine sand

    Votes: 9 22.0%
  • A shallow bed of coarser sand

    Votes: 10 24.4%
  • A deep sand bed

    Votes: 5 12.2%
  • Mixed substrate or varying sand depth

    Votes: 10 24.4%
  • Some other substrate (posted in the comments)

    Votes: 0 0.0%
  • I don’t have a reef tank yet

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new