180g build plumbing question

[desert_reefer]

So I just purchased a 180g tank. I’m currently planning out the best way to plumb the overflow. Here’s what I’m dealing with.

1 Main Drain hole (1.5”)
2 Return holes (3/4” ea)

Question is how should I best utilize these. Here are what I think are my options

1. Use 1.5” as a main drain (maybe durso?) and use both returns as returns. No emergency drain.
2. Use 1.5” as main drain, 1 of the 3/4” as an emergency and the other 3/4” as return (I’d T this off so there’d be 2 nozzles.

Thanks!

 

[Reefering1]

Use all 3 as a bean animal drain and bring the returns over the back glass

 

[Cichlid Dad]

Pictures would help. Are the actual holes only 1.5 and 3/4? Or are the pipes 1.5 and 3/4

 

[desert_reefer]

Pictures would help. Are the actual holes only 1.5 and 3/4? Or are the pipes 1.5 and 3/4

I’m waiting delivery but here’s the best one I have lol.

 

[Cichlid Dad]

I’m waiting delivery but here’s the best one I have lol.

Send us a link if you can

 

[desert_reefer]

Use all 3 as a bean animal drain and bring the returns over the back glass

Send us a link if you can

Purchased from LFS. It’s an Aqua Japan tank

 

[Reefering1]

Really need better pics/measurements for best advice. But I wouldn't want just one drain, it will be difficult to make quiet and venerable to blockage

 

[Cichlid Dad]

Purchased from LFS. It’s an Aqua Japan tank

https://aqualabaquaria.com/products...rium-system-aqua-japan?variant=12557389561961

 

[Cichlid Dad]

I run the same type of drain and return. I personally don't have an issue with noise unless I'm running my return pump very slow then I get some noise. Looks like the system doesn't come with plumbing. If that's the case you will have your hands full just putting the plumbing together as intended unless you have experience doing this. I would try as intended and change if you don't like it.

 

[desert_reefer]

I run the same type of drain and return. I personally don't have an issue with noise unless I'm running my return pump very slow then I get some noise. Looks like the system doesn't come with plumbing. If that's the case you will have your hands full just putting the plumbing together as intended unless you have experience doing this. I would try as intended and change if you don't like it.

I have experience with the plumbing portion. I’m not too worried about that. Just was more looking for advice on the best way to utilize the pre drilled holes. I’ve had smaller tanks and just T’d the return.

 

[Ivan Picazo]

I know it an old post, but what did you end up doing for your drains? I have the exact tank now and trying to figure out how to plumb it. I’m think about redrilling the holes for the 3/4” returns to accept a larger bulkhead and run either a herbie or a bean animal setup using all 3 and leaving the 1.5” as my emergency