2 Octo Pulse 4’s

tresguey

Community Member
View Badges
Joined
Oct 3, 2011
Messages
48
Reaction score
14
Location
So Cali
Rating - 0%
0   0   0
For my new 120 build I bought 2 Octo pulse 4’s. Hooked one of them up as I was filling the tank today. To my surprise it was very loud. I was going to go with a couple MP 40’s but figured sim
ce I bought a Regal 200INT which a various pump and the various 8 as a return pump keep everything in the same family. Anyone else have an issue with these pump being loud?
 
OP
OP
T

tresguey

Community Member
View Badges
Joined
Oct 3, 2011
Messages
48
Reaction score
14
Location
So Cali
Rating - 0%
0   0   0
So last night I removed the pump from the magnetic holder on the glass. I held it in my hand and applied full power. I could not hear the pump at all. Guess I will try adding some padding to the mount. I can really feel the vibration on the glass when it is running.

I also wonder if I should drain the tank and add neoprene padding under the frame of the tank. It is a wood stand, I didn't add padding since it was a framed tank.
 

JohnGP

Active Member
View Badges
Joined
Apr 8, 2020
Messages
247
Reaction score
224
Rating - 0%
0   0   0
I have two OctoPulse 4's and a VarioS 8 and they are all dead quiet so I'm glad you got it figured out.
 

Timo‘s Riff

New Member
View Badges
Joined
Sep 4, 2020
Messages
14
Reaction score
6
Location
Germany
Rating - 0%
0   0   0
I find the 4s very loud as well think the foam pad between the holder and the pump is not thick enough
 
OP
OP
T

tresguey

Community Member
View Badges
Joined
Oct 3, 2011
Messages
48
Reaction score
14
Location
So Cali
Rating - 0%
0   0   0
Timo, I agree. I had some 1/16” neoprene at home and made an extra pad. I did allow for water flow to the back of the pump. Looking at the design, I am pretty sure it needs a bit of flow... but the extra pad helped out a lot.
 

JohnGP

Active Member
View Badges
Joined
Apr 8, 2020
Messages
247
Reaction score
224
Rating - 0%
0   0   0
So last night I removed the pump from the magnetic holder on the glass. I held it in my hand and applied full power. I could not hear the pump at all. Guess I will try adding some padding to the mount. I can really feel the vibration on the glass when it is running.

I also wonder if I should drain the tank and add neoprene padding under the frame of the tank. It is a wood stand, I didn't add padding since it was a framed tank.
After re-reading this post this doesn't seem right, it sounds like to me your blade/s are out of balance, mine don't vibrate at all and are dead quiet unless I run them wide open. If I was you I'd contact RO and see if they'll exchange or send you new props.
 

Form or function: Do you consider your rock work to be art or the platform for your coral?

  • Primarily art focused.

    Votes: 11 8.7%
  • Primarily a platform for coral.

    Votes: 20 15.9%
  • A bit of each - both art and a platform.

    Votes: 85 67.5%
  • Neither.

    Votes: 5 4.0%
  • Other.

    Votes: 5 4.0%
Back
Top