3d printing newbie

Dedicated Reefer

Active Member
View Badges
Joined
Jan 22, 2020
Messages
117
Reaction score
95
Rating - 0%
0   0   0
I’m trying to figure out how to design prints for my Ender 3. I know it’s a budget printer. But it has printed shades for my Kessil 160s. I’m wondering it matters what filament you use. Is there better or worse filament?

image.jpg
 

The_Paradox

Valuable Member
View Badges
Joined
May 6, 2023
Messages
2,096
Reaction score
2,256
Location
On the Water
Rating - 0%
0   0   0
Ideally you would want to use NylonX or ABS, but that’s not really doable with your current set up without modifications. Look for a cheap spool of PETG on Amazon or some place like that. Should only be around 20 dollars. Not sure I would trust PLA. As far as actual brand… they all print the same to me. Just keep them dry or off-gas them if you think you have a moisture issue.
 

CWalters

Active Member
View Badges
Joined
Aug 4, 2022
Messages
461
Reaction score
280
Location
Chippewa Falls
Rating - 0%
0   0   0
Buy some Hatchbox petg reasonable price and prints good. I’m opposite of him ^ I feel you get what you pay for with filament. I’m not about the cheap “no name” brands. Less headache from the start
 

littlefoxx

7500 Club Member
View Badges
Joined
Dec 25, 2022
Messages
8,096
Reaction score
7,779
Location
Denver
Rating - 0%
0   0   0
I’m trying to figure out how to design prints for my Ender 3. I know it’s a budget printer. But it has printed shades for my Kessil 160s. I’m wondering it matters what filament you use. Is there better or worse filament?

image.jpg
To be honest I bought a pack of filament off amazon when I got my printer. Dont remember the name of it, but it works well for my ender 3
 

marinesnow

Active Member
View Badges
Joined
Feb 1, 2018
Messages
301
Reaction score
570
Rating - 100%
4   0   0
PETG is reef safe (in water), PLA is good for things outside of the tank. More important for good prints is your settings. As for designing, check out tinkercad. It's an easy to use platform for designing your first parts.
 

Gtinnel

10K Club member
View Badges
Joined
Mar 20, 2020
Messages
22,151
Reaction score
30,607
Location
Charleston, WV
Rating - 0%
0   0   0
I agree with everyone else that for anything that goes in the water petg is the way to go. I personally have only used overture brand petg and it prints fine for me, so I never saw a reason to try a more expensive brand.
 

cilyjr

Valuable Member
View Badges
Joined
Sep 28, 2011
Messages
1,591
Reaction score
1,650
Location
Arroyo Grande
Rating - 100%
1   0   0
A filament dryer is a good place to spend 60 to 80 bucks if you plan on sticking with 3d printing.
As filament absorbs moisture, it will become more brittle and prone to breaking, also it will cause problems when printing like oozing and defective prints.
I have put both pla and petg in the water, both will work.
Both will become more brittle over time, the PLA will happen faster then the petg.

As stated before, settings in your slicer are key to good prints. Play around with the settings, cura has tons, most hidden by default.
I think the standard ender3 has a Bowden extruder (you'll find settings for both Bowden and direct drive.

Scroll around and see what people are saying about ideal settings for different plastics.
I go to all3dp.com for a lot of information.
 

tharbin

5000 Club Member
View Badges
Joined
Oct 22, 2021
Messages
5,203
Reaction score
35,225
Location
Arizona
Rating - 0%
0   0   0
I would also suggest using PETG. While PLA is slightly easier to print and less expensive it is also not as UV or heat resistant as PETG. PLA is more rigid but I've even used PETG for light mounts with good success. I've used both Hatchbox and MatterHackers Build PETGs with equally good results using Cura's Generic PETG settings.
 

TOP 10 Trending Threads

WHICH OF THESE CREEPY REEF CRITTERS IS MOST LIKELY TO GIVE YOU NIGHTMARES? (PICTURED IN THE THREAD)

  • The Bobbit Worm

    Votes: 47 66.2%
  • The Goblin Shark

    Votes: 4 5.6%
  • The Sea Wolf

    Votes: 0 0.0%
  • Giant Spider Crabs

    Votes: 1 1.4%
  • The Stargazer Fish

    Votes: 5 7.0%
  • The Giant Isopod

    Votes: 9 12.7%
  • The Giant Squid

    Votes: 1 1.4%
  • Other (Please explain!)

    Votes: 4 5.6%
Back
Top