8800 Booster Pump - auto flush flow kit needed or just the flow restrictor?

[J Crew]

I'm going to purchase the 1/4" 8800 Booster Pump Kit. I'm having difficulty getting information on what is needed to add an auto flush to this booster pump.

Do I need the full kit?

100 GPD Auto Flush Flow Kit

Never worry about flushing your RODI systems membrane ever again! Membrane flushing is a maintenance task that commonly gets overlooked and forgotten about, but consistent flushing of your reverse osmosis membrane can dramatically improve its life and production rate. The Aquatec Auto Flush Flow...

www.bulkreefsupply.com

Or is just the auto flush pump sufficient? Is there a splice connector included so I can use the transformer included with the Booster Pump Kit?

Auto Flush Flow Restrictor

Choose the Aquatec Auto Flush Flow Retrictor that meets your RODI systems flow rate. 300 mL/min 400 mL/min 500 mL/min for 75 GPD single membranes or 150 GPD Water Saver Systems 600 mL/min 700 mL/min 800 mL/min for 100 & 150 GPD single membranes or 200 GPD Water Saver Systems The Aquatec...

www.bulkreefsupply.com

As always, thanks for the help and info around this!

 

[Jason_MrFrags]

You don't need the full kit if you already have the transformer for the booster pump. It will just plug right into that. The pressure switch just turns everything off once it reaches the float valve. Or if you are using switches to control the shutoff

 

[Buckeye Hydro]

Membrane Flush Kit

At Buckeye Hydro we specialize in providing the highest quality water filtration systems and accessories for every potential need.

www.buckeyehydro.com