93 Cube for under a grand. It can be done... I think. UPDATED GRAND TOTAL! :)
- Build Thread
- Thread starter dantimdad
- Start date
- Tagged users None
crusso1993
7500 Club Member
On your toes? We've seen pics. You haven't been on your toes in 30 years... minimum!
OP
OP
dantimdad
7500 Club Member
The pump went out on my ATO. My fault entirely.
The nice thing about a well planned DIY project is, later on, maintenance is a snap. I made it to where the low voltage pump was hooked to the relay box via a plug instead of hard wired. So, all I had to do was swap the hose to the new pump, route the wire through the hole in the ATO container lid and plug it in. Then I flipped the switch on the control panel labelled ATO and all was right with the world.
The nice thing about a well planned DIY project is, later on, maintenance is a snap. I made it to where the low voltage pump was hooked to the relay box via a plug instead of hard wired. So, all I had to do was swap the hose to the new pump, route the wire through the hole in the ATO container lid and plug it in. Then I flipped the switch on the control panel labelled ATO and all was right with the world.
Wishing the staff and owners of Main Street Aquarium the best of the Christmas season and a happy New Year!
OP
OP
dantimdad
7500 Club Member
Thanks brother!
Merry Christmas to your family from ours!
BTW, I need a weird sized, custom sump cut. We need to talk.
Weird fits me to a tee....I mean sump wise...lol!
crusso1993
7500 Club Member
Wishing good tidings to you and Sherry... but mostly Sherry!
OP
OP
dantimdad
7500 Club Member
I will message you
southerntnreefer
Valuable Member
your opening the store on my birthday?!?! how thoughtful! May have to come spend some of that birthday cash with yall.
crusso1993
7500 Club Member
Wishing you and your family nothing but good health and happiness in 2020!
OP
OP
dantimdad
7500 Club Member
Wishing you and your family nothing but good health and happiness in 2020!
You too brother!
Much love in the coming year!
OP
OP
dantimdad
7500 Club Member
So I split the 16 foot setup into two 8 foot peninsulas. It worked out better with the floor plan.
The view from the street of the saltwater side:
Who's that handsome bald guy?
The view from the street of the saltwater side:
Who's that handsome bald guy?
najer
Valuable Member
So I split the 16 foot setup into two 8 foot peninsulas. It worked out better with the floor plan.
The view from the street of the saltwater side:
Who's that handsome bald guy?
Mate you need to frown less whilst concentrating on the phone camera!
southerntnreefer
Valuable Member
Is that what finally became of that 265 monstrosity?So I split the 16 foot setup into two 8 foot peninsulas. It worked out better with the floor plan.
The view from the street of the saltwater side:
Who's that handsome bald guy?
OP
OP
dantimdad
7500 Club Member
No, This is all built by Ryan and I.
I am about the cut up the 265 and use the front glass on a plywood tank project in the near future. Quite possibly an 80"x48"x30" tall predator display but haven't decided yet.
I am about the cut up the 265 and use the front glass on a plywood tank project in the near future. Quite possibly an 80"x48"x30" tall predator display but haven't decided yet.
Brew12
Electrical Gru
You are excused.
So when are you going to start stocking up on coral frags to get ready for the grand opening?
southerntnreefer
Valuable Member
Nice!!! Looking forward to seeing that.
OP
OP
dantimdad
7500 Club Member
We have to paint and plumb then stock.
Similar threads
