Acclimation on GHL Mitras?

[kilnakorr]

Hi

Does anyone know how or if it's possible to set acclimation from current settings to higher output?
It seems when setting the acclimation, you set it at X% of your desired target.
I would like to to set it from current settings to new target, not a percentage of desired target.

 

[BCSreef]

Set the lights to your new target, then set acclimatization back to your current level.

 

[kilnakorr]

Set the lights to your new target, then set acclimatization back to your current level.

But if my desired target for a channel is 90%
and it's currently at 75%.
Would setting it on 90% and acclimation on 75% not be be 75% of the target 90%?
Some channels like red are much lower, so they shouldn't change to 75%?

 

[BCSreef]

I use the GHL Light Composer. To start, I set the fixture brightness to 100%. Then I set each of the 9 channels to achieve a 14,000K spectrum and my maximum desired PAR. Then I set "Acclimation" to 50% to 100% over the 1st month. Each individual channel starts at 50% of target and ends up on target after 1 month.

I hope that makes sense.

 

[kilnakorr]

I use the GHL Light Composer. To start, I set the fixture brightness to 100%. Then I set each of the 9 channels to achieve a 14,000K spectrum and my maximum desired PAR. Then I set "Acclimation" to 50% to 100% over the 1st month. Each individual channel starts at 50% of target and ends up on target after 1 month.

I hope that makes sense.

I just did a few test.
I hate how it only has the current setting as target and not as starting point.
It means I have to calculate the new target setting on every channel at every time point.
But I guess that's just how it is.

 

[BCSreef]

What app do you use for your lights? Light Composer shows starting intensity and ending intensity for the fixture

 

[BCSreef]

 

[kilnakorr]

For now I've just used the app.
But even with the light composer, I still need to adjust all channels to my target and the adjust X% down.
Would be easier to just keep my existing settings and set X% up.