Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I'm currently down to my last kessil 360we out of 3 I purchased a while back. Was interested in the 360x but wanted feedback. Why wouldn't get the Ai blades?I wouldn't get them if I were you.
But 21 inch. You're going to want a 2 grow and a glow.
Glow makes it look good and grow adds the whites and other stuff.
Glow is just blues no whites or anything else.
But they're overly expensive and get in the way too much compared to something like primes or kessels.
I Will look into the prime 16. I came in the hobby as a kessil Stan lolIf it matters, I had 2 grows and 1 glow, all 21" on my IM 20 Penn. tank at 12" above the sand (used the standard mounting feet) and the PAR levels from my PMK showed about 160 PAR at the sand.
I did replace them for Prime 16's. 2 of them show 133 PAR on the sand. I like the Prime's better even though a little less par for me. The Primes are about 22" from the sand.
What other direction, if you don't mind me asking?I believe the leds have a 95 degree spread so the 21” would be appropriate at 7” above the tank. I cannot comment on whether/how many grows versus glows. I looked at these when I planned to upgrade my lights, but decided to go another direction.
I have 3 blades (1 glow 2 grows) over my 75 gal. They produce alot of light but one of them just turns off randomly.I Will look into the prime 16. I came in the hobby as a kessil Stan lol
Really nothing wrong with the blades, it was just that having them on the top of the tank edge was a problem, 3 of them took the whole width so I had to move one for feeding/etc. I tried the above tank mount but it just didn't do it for me aesthetic-wise.I Will look into the prime 16. I came in the hobby as a kessil Stan lol
this for me + I have lost 2 blades due to my dropping them in the tank when I was moving them for maintenence.I have 3 blades (1 glow 2 grows) over my 75 gal. They produce alot of light but one of them just turns off randomly.
But I have 2 prime 16 over my 80gal shallow and I like it so much better. They also don't get in the way.
I've almost dropped mine in several times. But they get covered in salt creep too.this for me + I have lost 2 blades due to my dropping them in the tank when I was moving them for maintenence.
They do NOT like to get wet.
The Orphek OR3 60 bars with the Osix controller better fit my situation.What other direction, if you don't mind me asking?
They are IP66 rated, not waterproof for sure:Dropped one end in the water a few weeks ago and not an issue.
Thanks for the informative info.Been running Blades since February. Video in my tank build.
I’ve used or tested almost every major LED on the market and the Blades impressed me the most by a mile.
I had some of the early batch issues but AI handled all those and I’ve been running smoothly ever since. Dropped one end in the water a few weeks ago and not an issue. They are IP rated.
You will need 4 Primes to cover that tank properly and will still have shadowing and issues. They need to be mounted much higher than 7” off the tank. BRS has great videos on all of these lights to show what works best for your setup. 7” off the water is the sweet spot for the Blades and they won’t be in the way. Mine are hanging 8” off the water and never in the way.
dang, that sucks. One would assume it'll be water proof or least resistance.They are IP66 rated, not waterproof for sure:
AI warranty would not replace mine after dropping the end in water.
Edit to add:
It's important to note that although an IP66 enclosure is waterproof against hose-directed water and falling drops of rain or snow, it's not intended to be submerged in water.
My power ends were below the surface albeit only for a second or three.
All the Glow models are more expensive. It’s the violet LEDs. They are far more expensive than royal blue LEDs.Thanks for the informative info.
I'm contemplating on starting with 1, 21inch grow & glow, based from the responses from thisthread. But the kessil 360x is calling me...the reviews are guiding me into other options. Would you happen to know why the ai 21 inch glow is more significantly more expensive than the grow?
I also got the early batch ones.Been running Blades since February. Video in my tank build.
I’ve used or tested almost every major LED on the market and the Blades impressed me the most by a mile.
I had some of the early batch issues but AI handled all those and I’ve been running smoothly ever since. Dropped one end in the water a few weeks ago and not an issue. They are IP rated.
You will need 4 Primes to cover that tank properly and will still have shadowing and issues. They need to be mounted much higher than 7” off the tank. BRS has great videos on all of these lights to show what works best for your setup. 7” off the water is the sweet spot for the Blades and they won’t be in the way. Mine are hanging 8” off the water and never in the way.