Algae with zero nitrates and phosphates. What do I do?

  • Thread starter Thread starter glb
  • Start date Start date
  • Tagged users Tagged users None

glb

7500 Club Member
View Badges
Joined
May 12, 2013
Messages
8,185
Reaction score
3,302
Location
Miami
What state or country do you live in
Florida
Rating - 0%
0   0   0
I’ve been battling algae for months now after a partial tank crash. It looks like brown and green hair algae. I’ve treated with Chemiclean 3 times with no lasting results. I know the algae may be consuming all the nutrients and I don’t know how to fix it. The livestock (fish, acans, rock anemones) don’t seem bothered, but the tank looks terrible! Here are my parameters and some pics below. Any and all help is appreciated!

Numbers
Alk 8.4 dk
Ca 490 ppm
Mg 1470 (will let it decrease on its own
No3 0
PO4 0
Temp 76.1
SG 32.7 (will gradually fix with water changes)

Pics
image.jpg
image.jpg
 
Last edited:
Manual removal and add more members to your cuc. You're going to have to remove it manually first though.
How big is the tank and what kind of fish?
 
Manual removal and add more members to your cuc. You're going to have to remove it manually first though.
How big is the tank and what kind of fish?
40g breeder
Two clownfish
Royal Gramma
Spotted mandarin

Thanks for your help!
 
Evertime you use chemiclean you destroy your biome. Get you hands wet daily. Fix your bottom out nutrients. Cut lights to 6 hours with blue and uv only no white. Get a diverse cleaner crew with tuxedo urchins and turbos. Prepare for a 3 month battle.
 
Evertime you use chemiclean you destroy your biome. Get you hands wet daily. Fix your bottom out nutrients. Cut lights to 6 hours with blue and uv only no white. Get a diverse cleaner crew with tuxedo urchins and turbos. Prepare for a 3 month battle.
Thank you! So I should raise the nutrient levels?
Are raising No3 to 3-5ppm and Po4 to about 0.03 good numbers?
 
Thank you! So I should raise the nutrient levels?
Are raising No3 to 3-5ppm and Po4 to about 0.03 good numbers?
.1 phosphate and 10 nitrates. If you raise magnesium to 1500 it helps weaken GHA to and makes manual removal easier.
 
Ooh. This is a fun project.

Here’s how I would go about it:

1) Scrub the rocks with a toothbrush. You can do this during a water change and siphon out the large pieces.

2) Add more CUC. Mexican turbos should work very well.
 
You actually got perfect advice above. Grazing fish more than not will outgrow you tank, so a good clean up crew is a must. They are a nuisance at times, but Mexican Turbos are like lawn mowers for this stuff. I’ve been down this road, follow the advice you already received in here, manual removal, CUC and the Magnesium trick I wish I had known.
 
.1 phosphate and 10 nitrates. If you raise magnesium to 1500 it helps weaken GHA to and makes manual removal easier.
Is that po4 .1 ppb?
 
Throw your test kits in the garage and use your eyes. Tank is overgrown with algae and filthy. Manually remove the algae by scrubbing the rocks and do WC. Testing here is worthless…
 
A lot of great advice above. One additional thing to consider: make sure there isn’t also dinos mixed in. Dinos love low nutrient environments. Hard to tell what you have from the pics posted. Regardless of what you have first step is manual removal. With the amount of biomass you need to remove, you should remove the rockwork from the tank and scrub them down thoroughly. I would use a hard wire brush.
 
The nutrients are being immediately consumed by the nuisance algae in the display. Thae same nutrients could fuel a dedicated algae scrubber. Making the job of "harvesting" a type of algae that will naturally in the scrubber's chamber: a much easier job. I like the Santa Monica units myself, yet Ice Cap units and DYI projects of them are popular. Besides diminishing the primary nutrient supply of the nuisance algae there are other benefits you will find as you research the Algae Scrubber filters.
 
The nutrients are being immediately consumed by the nuisance algae in the display. Thae same nutrients could fuel a dedicated algae scrubber. Making the job of "harvesting" a type of algae that will naturally in the scrubber's chamber: a much easier job. I like the Santa Monica units myself, yet Ice Cap units and DYI projects of them are popular. Besides diminishing the primary nutrient supply of the nuisance algae there are other benefits you will find as you research the Algae Scrubber filters.
ATS probably doesn’t make much sense for someone with a 40 gallon breeder and 4 small fish. I believe the basic issue here is basic tank maintenance and adjustment of more basic import / export.
 
40g breeder
Two clownfish
Royal Gramma
Spotted mandarin

Thanks for your help!
What are you using for nutrient export? I assume you at least have filter socks and protein skimmer? Whatever you have, you should supplement with snails as recommend above. I prefer Astrea and Trochus since they can get into tighter area. Turbos are unbeatable in terms of mass of algae remove but they get big.
 
What are you using for nutrient export? I assume you at least have filter socks and protein skimmer? Whatever you have, you should supplement with snails as recommend above. I prefer Astrea and Trochus since they can get into tighter area. Turbos are unbeatable in terms of mass of algae remove but they get big.
I have a skimmer and filter sock. I have 3 or 4 snails but I’m not sure what type.
 
A lot of great advice above. One additional thing to consider: make sure there isn’t also dinos mixed in. Dinos love low nutrient environments. Hard to tell what you have from the pics posted. Regardless of what you have first step is manual removal. With the amount of biomass you need to remove, you should remove the rockwork from the tank and scrub them down thoroughly. I would use a hard wire brush.
I started with this yesterday. The tank looks better today!
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.5%
  • Fish or coral food

    Votes: 5 5.4%
  • Test kits or reagents

    Votes: 10 10.9%
  • Filter media or replacement fleece

    Votes: 5 5.4%
  • RO/DI filters or supplies

    Votes: 14 15.2%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 10.9%
  • I keep a backup of everything

    Votes: 24 26.1%
  • Other (Post in the comments)

    Votes: 7 7.6%
Back
Top
Home
Post thread…
Market
What's new