Alkatronic Users Thread

[Jack Mammon Bifrons]

This machine giving me nothing but hassle...
Iv got the alkatronic and dostronic together. Ever since i FINALLY got this thing running its not been dosing alk. Its know reading that alk is too low and still not dosing (good thing because its threatened to dose 18.6ml alk followed by a 20 odd ml dose) it is however dosing ca/mg off the first pump on the connected dosetronic... i guess when your alkatronic mode it forfeits its dosing(alk adjustment) pump. Is that right?
Iv turned off the alkatronics dosetronic mode and still nothing, just keep testing.
Im also now terrified the alkatronic, at some point, is going to make some huge dose of alk in one go and kill my tank...
Anyone have any input.

 

[Robinson]

For those still having issues with WIFI connection and cloud access, if your units is a second hand, you have to tell the previous owner to login into the cloud and unlink the alkatronic from his account. Then you will be able to register the system under your account and will be displayed correctly on cloud. This is exactly what happened to me, after a couple of hrs trying and I was sure that the system was connected to my router, this was what fixed the cloud connection.

Hope this can help somebody.

 

[jerl77]

Anyone dosing Esv alk through it ??

 

[reef / aholic]

finally joined the family ...

 

[Sisterlimonpot]

finally joined the family ...

haha... carbon fiber sticker???

 

[reef / aholic]

3M Wrap Film, this happens with too much free-time and also not a fan of the orange unless it burnt orange "hook 'em horns".

 

[Dennis Cartier]

Has anyone run across this issue. When I attempt to upgrade my firmware, I get stuck at "Checking target MCU..." and it hangs there forever. My unit is first gen.

I don't use Facebook, does anyone have an email support address for them? Oops, nevermind, it is on their website.


I am hoping they have fixed the connectivity issues in the new firmware. My unit connects fine to the cloud, but BT is terrible (drops constantly) and the new controls in the portal don't seem to work for a lot of options (like calibrating the PH probe).

** Update ** Nevermind, I heard from Focustronic. User error, I needed to plug the unit back into power to start the upgrade (I was thinking the USB was powering the SBC, nope).

Dennis

 

[djreastman]

Has anyone run across this issue. When I attempt to upgrade my firmware, I get stuck at "Checking target MCU..." and it hangs there forever. My unit is first gen.

I don't use Facebook, does anyone have an email support address for them? Oops, nevermind, it is on their website.


I am hoping they have fixed the connectivity issues in the new firmware. My unit connects fine to the cloud, but BT is terrible (drops constantly) and the new controls in the portal don't seem to work for a lot of options (like calibrating the PH probe).

** Update ** Nevermind, I heard from Focustronic. User error, I needed to plug the unit back into power to start the upgrade (I was thinking the USB was powering the SBC, nope).

Dennis

I wish I was making the same mistake. I'm also stuck on the "Checking target MCU..." but the unit is powered up (off and then on) and no response. The serial port driver is installed fine. I'm also trying to fix the lack of control through the cloud or android app and unable to calibrate pumps. Display says version 4.0.2.1 when I turn it on.

 

[ReefBeta]

What was supposed to be the corrective buffer solution for action mode? I tried once and it's said to dose 57ml solution. But based on the calculator using BRS 2 part, it should be only 16.7ml. Is there any instruction on how to mix the kh buffer to the expected concentration?

 

[MentalNote]

For the Alkatronic, you can use any alk buffer solution.

There is a table in the manual or on their website that shows how to modify the “aquarium volume” to account for different Alkalinity concentrations.

 

[ReefBeta]

For the Alkatronic, you can use any alk buffer solution.

There is a table in the manual or on their website that shows how to modify the “aquarium volume” to account for different Alkalinity concentrations.

Ah, found it. So the default is based on classic balling recipe. Knowing that make the calculation easy enough.

 

[Kayvon]

Can any Alkatronic user tell me what the differences between the different batches are? I have found someone selling a batch 1 unit, but am not sure on if there's a groundbreaking update.

 

[GoVols]

Can any Alkatronic user tell me what the differences between the different batches are? I have found someone selling a batch 1 unit, but am not sure on if there's a groundbreaking update.

Make sure that it has the quiet kit upgrade on it. To be honest it would be better to find a batch 3 unit.

Get ready to change its intake filter / check valve, pump inner tubings, and buy a new ph probe.

Alkatronic Check Valve

Alkatronic Check Valve Prevents contaminants from entering the Alkatronic unit

www.coralvue.com

Alkatronic Dosing Head Inner Replacement Tube

Alkatronic Dosing Pump A, B, C, or D Inner Tube Replacement Super flexible tubing ideal for the use with Alkatronic dosing heads A. Sold individually as 5" section with end adapters included. IMPORTANT: To be used as dosing head replacement tubing ONLY.

www.coralvue.com

pH Probe for Alkatronic

pH Probe for Alkatronic

www.coralvue.com

Bought a batch 3 on the first US shipment and have never taken another firmware update for the main unit.

 

[Kayvon]

@GoVols
Would it be worth it if it were $300?

 

[GoVols]

@GoVols
Would it be worth it if it were $300?

Unless you know the seller and have seen it run (with the silencing kit), I'd take a pass and wait on a Batch 3 unit to pop up.

JMO...

 

[Sam22]

Anyone had an issue with the alkatronic being stuck in please wait I bought a brand new one today managed to connect but the pump would prime so I turned it off and back on and it’s been stuck just saying please wait... in the front for a couple hours now I did turn it in and off a couple times

 

[panic]

My new to me (used) Alkatronic is a brick right now. Setup and wifi connection was successful, completed 3 scheduled measurements, then I opened up the Remote Desktop on my pc after closing out the app to see if I was going to be able to access the info while I’m traveling and it’s locked up. I’ve logged in and out from both multiple times including removing wifi from setting, saving after every change, unplugging, waiting, etc. App says it’s connected, shows up as active in my router, password and ssid are correct, but any entry does not reflect on the lcd screen, won’t do a forced measurement from remote or app. I was receiving some basic tips via email from support but they have been silent for 2 days now. Any ideas on what I can do here?

 

[ReeferBud]

My new to me (used) Alkatronic is a brick right now. Setup and wifi connection was successful, completed 3 scheduled measurements, then I opened up the Remote Desktop on my pc after closing out the app to see if I was going to be able to access the info while I’m traveling and it’s locked up. I’ve logged in and out from both multiple times including removing wifi from setting, saving after every change, unplugging, waiting, etc. App says it’s connected, shows up as active in my router, password and ssid are correct, but any entry does not reflect on the lcd screen, won’t do a forced measurement from remote or app. I was receiving some basic tips via email from support but they have been silent for 2 days now. Any ideas on what I can do here?

did the previous owner unregister the Alkatronic?

if not, it will not work correctly with a new user. This happened to me and Focustronic support was able to fix it.

 

[panic]

did the previous owner unregister the Alkatronic?

if not, it will not work correctly with a new user. This happened to me and Focustronic support was able to fix it.

He did unregister and it worked right after that in the beginning.

 

[Marlon_Holland]

Hello, my second hand Alkatronic says off line in the app and I am trying to figure out how to get it back online help please. The previous owner has unlinked their account, so I see the device in the app, but offline.