Amount of GFO & pump sizing for reactor

  • Thread starter Thread starter kwirky
  • Start date Start date
  • Tagged users Tagged users None

kwirky

Community Member
View Badges
Joined
Aug 14, 2019
Messages
70
Reaction score
54
Location
Calgary, Canada
What state or country do you live in
Canada
Rating - 0%
0   0   0
I want to get my phosphate from 0.16ppm to almost undetectable & have some questions.

System details:
  • I test at 0.0-0.2ppm (hard to tell colour) nitrate (salifert) and 0.16ppm phosphate (red sea). Been this way for 3-4 weeks now.
  • I have a 40g sps setup that's quite new (2 months).
  • I have 3 small nano-sized fish & plan on adding 1-2 more in the next year.
  • I feed 1/8 of a cube of mysis or brine daily and 1/4 tsp reef roids every 2 days
  • That's with 100mL of rowaphos in a media bag sitting in a filter sock, kneaded every 2 days when I replace the filter socks.
  • I vodka dose 0.25mL vodka daily via a dosing pump.
  • I began dosing 5g potassium nitrate weekly due to undetectable nitrates, trying to get the bacteria consuming the carbon to reduce the phosphates, too.

First question: is 50-100mL of fluidized GFO media enough?

Second question: Is a Jebao DC650 (180gph with 0 head pressure) enough to keep that amount of GFO simmering in an Aquamaxx XS media reactor?

My calc/alk/mag are doing great and I haven't seen algae with such low nitrates so I think this is the last thing to handle before I can add some hardy coral.
 
First question: is 50-100mL of fluidized GFO media enough?

Second question: Is a Jebao DC650 (180gph with 0 head pressure) enough to keep that amount of GFO simmering in an Aquamaxx XS media reactor?

The fluidized GFO in a reactor is going to be far more effective than in a filter bag. Bulk reef says to start with 1 tablespoon per 4 gallons tank water which would put you at around 150 ml. i think 100 would be good to start with.

I am not familiar with Jebao and how accurate their output ratings are. But 180 gph is more than enough to tumble GFO in that sized reactor. In a phosban reactor I was pushing like 80 GPH through and tumbling. You only want it barely "boiling".
 
The fluidized GFO in a reactor is going to be far more effective than in a filter bag. Bulk reef says to start with 1 tablespoon per 4 gallons tank water which would put you at around 150 ml. i think 100 would be good to start with.

I am not familiar with Jebao and how accurate their output ratings are. But 180 gph is more than enough to tumble GFO in that sized reactor. In a phosban reactor I was pushing like 80 GPH through and tumbling. You only want it barely "boiling".

Thanks, I thought so.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new