Thanks for checking it out!sweet system!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Thanks for checking it out!sweet system!
Thanks for checking it out, Corals are coloring up nicely these daysFollowing. This is going to be amazing...what a project!
It is, like 2.5" square tubing same builder as the stand for the 720 at the beginning of the thread. I had to build it in the room so I opted for this route of the platform and the uprights... with our recent earthquake I am rethinking my crazinessIs the platform made of steel? Looks well powder coated!
Thanks Calvin! I’ll work on it over the weekendBummer. I know you will get it figured out. Hope an easy solution presents itself soon.
Planning on pins, I have an idea on how to do this and have built lots of >200 gallon tanks in the past but this too is my first time working with this thick of material and this size tank. Thickest build in the past was a 1/2" sump at 8'x4'x2'. Very open for best practices if anyone wants to chime in! Otherwise I will try and get hold of Bill Wann again and get some final pointers before I get to bonding!!@dca22anderson What method are you going to use to cement the panels together? Pins, I assume? Do you use corner braces as well? I've only built small tanks so far and you can get away without pins and braces... just tape works fine. :0) Looking forward to watching this build!