Anyone still running durso?

  • Thread starter Thread starter 501Reefer
  • Start date Start date
  • Tagged users Tagged users None

501Reefer

Active Member
View Badges
Joined
Aug 17, 2018
Messages
159
Reaction score
82
What state or country do you live in
Arkansas
Rating - 0%
0   0   0
Well i hit the first road bump in my new build. I've got a 60 gallon cube with an internal overflow with 2 holes in the bottom. Looks like my only options are durso or get a 3rd hole drilled for bean.
 
I have a 60g cube with the 2 holes in the bottom. I run a Herbie overflow. Works great other than needing a couple adjustments from time to time.

I switched because the Herbie was much quieter.
 
I have a 60g cube with the 2 holes in the bottom. I run a Herbie overflow. Works great other than needing a couple adjustments from time to time.

I switched because the Herbie was much quieter.
Did you drill another hole for your return?
 
I have a 60g cube as well with durso setup. Hindsight, I wish I would have drilled for a separate return and converted to a herbie. My first tank, so I didn’t know the difference. For months it sounded like a loud shower drain, but I was finally able to tune so I don’t notice anymore.
 
I have a 60g cube as well with durso setup. Hindsight, I wish I would have drilled for a separate return and converted to a herbie. My first tank, so I didn’t know the difference. For months it sounded like a loud shower drain, but I was finally able to tune so I don’t notice anymore.
At this point budget is more of a problem than noise so I'm thinking I will just run durso. Thanks for your input
 
I am so old, I remember when we use to have a waterfall in our tank. I used to put a slanted piece of acrylic to decrease the noise. Then Richard Durso came up with the Durso overflow. A huge improvement. Now we have essentially silence overflow. The thing is I am fairly deaf now so a little noise does not bother me much.
 
I have a 60g cube as well with durso setup. Hindsight, I wish I would have drilled for a separate return and converted to a herbie. My first tank, so I didn’t know the difference. For months it sounded like a loud shower drain, but I was finally able to tune so I don’t notice anymore.
Just single drain, single return? After measuring mine if I was to add a 3rd hole I'd have to relocate it out of the overflow box. I'm sure many tanks are still ran with a single drain but it feels a little like playing with fire to me.
 
I only run standpipes - durso or otherwise. I do not care about noise, and I like that they never clog or need adjustments. I use 1.5 or 2.0 inch on everything. Yes, they still work. You can build mufflers for them and with a sock on the other side, they are pretty quiet, but probably not silent.

I have no capacity to risk any kind of a flood, so a bit of noise is a fine with me. I also like that they can take up very little room in my tank like this:
Screen Shot 2020-05-18 at 8.31.51 AM.png
 
I turned my pre-drilled tank into Herbie. I used the two pre-drilled holes for my drain, one for my primary drain standpipe and the other as my emergency standpipe. I run an return in the back and over the lip of the tank.

As others mentioned, it is completely silent. Every once in a while, it makes some noise when I pause the return for feeding or water change due to air bubbles getting trapped in the pipes.
 
I have 2 durso systems, while they may not be dead silent, I don't find them loud. Personally I don't want a silent tank, I want some hum or splashing or some kind of white noise that indicates the systems are running.

My latest frag tank is a herbie. I was originally going to do a bean but didn't bother with the 3rd drain since there is minimal risk of clogging and it's not extremely high flow. It for sure is quieter but again I don't find anything exceptionally loud about durso.
 
It's not the durso that I'm worried about. It's the fact that I only have 1 drain with no emergency. i actually prefer the sound of running water.
 
Twin Dursos. Last tank had a single. Been running them since 2004 without one single problem ever. If it’s too noisy then your standpipe is too short
 
I set this tank up with 3 holes drilled one for Durso one for return one for emergency overflow and the Durso has been virtually silent the 8 years it's been running..
 
My 60g cube is running a durso since that's the way it came originally. In hindsight I would have went with a non-corner flow setup and got an external overflow kit. That's the "fun" part of this hobby lol. Making choices and learning from them constantly :p My first SW tank was a rimmed 75g with a canister filter, so I'm making progress slowly lol
 
make it a herbie, run the return over the back of the tank. paint it black if you dont want it to be as noticeable.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 15 18.1%
  • Fish or coral food

    Votes: 5 6.0%
  • Test kits or reagents

    Votes: 8 9.6%
  • Filter media or replacement fleece

    Votes: 4 4.8%
  • RO/DI filters or supplies

    Votes: 13 15.7%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 12.0%
  • I keep a backup of everything

    Votes: 21 25.3%
  • Other (Post in the comments)

    Votes: 7 8.4%
Back
Top
Home
Post thread…
Market
What's new