Apex Classic question on running my TUNZE Nanostream Turbelle pumps?

[FLSharkvictim]

Bare with me since this is my 1st controller
How I do I run a pair of Nanostream Turnbelle TUNZE 6055 pumps off my Neptune Apex Classic.
I am wondering do i NEED Any modules to have full control over them?
I did buy the Neptune Apex 2channel stream cable for my TUNZE pumps. Let me know your thoughts?


Tank Info:
120 Mixed Reef
Apex Classic Controller
Ecotech M1 pump
Skimz 163 DC Montzer Series skimmer
Custom sump / Refuge
2 TUNZE Turbelle Nanostream 6055's
2 AI Hydra TwentySix HD LED Fixtures
Celestial C35W Maxspect Refuge Spotlight
Aqua UV Ultraviolet Sterilizer 25w
BRS Dual Media reactor
Eshoops IV Master & Slave Doser
Tunze 3155 Auto Top Off

 

[ngvu1]

Apex classic has 2 VDM ports that can control up to 4 tunze pumps. The hard part is the programming. however, there are many sample codes and help here and RC....if you search a bit

 

[FLSharkvictim]

Apex classic has 2 VDM ports that can control up to 4 tunze pumps. The hard part is the programming. however, there are many sample codes and help here and RC....if you search a bit

So then I would need to grab the VDM Mod correct?

 

[ngvu1]

That means you don't need to grab anything unless the 2 vdm ports on the apex base have been used!

So then I would need to grab the VDM Mod correct?

 

[Breadman03]

Apex classic has 2 VDM ports that can control up to 4 tunze pumps. The hard part is the programming. however, there are many sample codes and help here and RC....if you search a bit

One can now also use "wizards" for programming them, which is naturally a bit easier than the old method.