I had some trouble trying to update the firmware on my Apex to get to version 5.11 1D23 and after six attempts, it finally completed, but now I'm missing the mini-charts. Can someone help?
Apex firmware update glitch
- Thread starter Rovert
- Start date
- Tagged users None
SPR1968
No, it wasn’t expensive dear....
Ultimate Member
Reef Squad
Excellence Award
Reef Tank 365
UK Reef Club Member
Hospitality Award
I can’t help with the question, but I can bump the thread to see if we can get you some assistance
OP
OP
Just checking in to update those of you who are having problems.
After nearly two weeks of waiting for Neptune support (because they're "busy"), I sought my own solution and stumbled across this YouTube video. It seems that this is a known problem where the MicroSD cards in the units become corrupted during or after a firmware update. It's easy enough to open the unit, and replace the card. I'm not saying it'll cure the problems others have, but it solved the issue for me.
Note that in the video, the trick to removing the card is that you have to slide the top locking plate toward the large IC (away from the edge of the board) and flip it up like a 'hatch' or 'lid'. You can then easily lay in a new card and lock it back into place. IMPORTANT: Despite the recommendation in that video, I wouldn't use just any crappy SD card, it's just not worth saving a few bucks. Also, get a 16GB card to be sure you have enough room.
Good luck to all!
After nearly two weeks of waiting for Neptune support (because they're "busy"), I sought my own solution and stumbled across this YouTube video. It seems that this is a known problem where the MicroSD cards in the units become corrupted during or after a firmware update. It's easy enough to open the unit, and replace the card. I'm not saying it'll cure the problems others have, but it solved the issue for me.
Note that in the video, the trick to removing the card is that you have to slide the top locking plate toward the large IC (away from the edge of the board) and flip it up like a 'hatch' or 'lid'. You can then easily lay in a new card and lock it back into place. IMPORTANT: Despite the recommendation in that video, I wouldn't use just any crappy SD card, it's just not worth saving a few bucks. Also, get a 16GB card to be sure you have enough room.
Good luck to all!
Similar threads
