Here's link to troubleshooting guide: https://www.reef2reef.com/ams/neptu...torials-part-3-automatic-top-off-kit-atk.692/
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I just renamed the FMM to ATK prior to posting, it was a generic name prior to that. Here’s the ATK FMMCan you post pic of physical FMM module showing numbered connections and numbered cables?
In your pic of your ATK code, the name at the top is cut off but it doesn't look like it is named "ATK". What is the name?
Can you also post a pic like this from your setup so we can see your FMM diagram?
The cable is seated and the PMUP is plugged into the 24v port.Looking at your physical FMM pic. Cable #1 doesn't appear to be fully seated into FMM port #1. Can you confirm that all the cables are fully seated?
Just to confirm, the cable plugged into the "ACC" port is your pmup pump?
That’s how I discovered that the pump was still running despite it not supposed to. It was only running a few seconds at a time, but running nonetheless.Then, if the ATK turns on or off, it will be logged like this: