Good afternoon family, I'm hoping someone can solve this issue that's puzzling me on my apex. I would like the apex to do the following:
1. If the main system pump is off then the skimmer should be too, once the main system pump is running the skimmer should turn on 2 minutes after the main system pump is back on.
2. If power is lost, turn the skimmer back on 2 min after power is restored.
This is what I have programmed for the skimmer input:
Fallback OFF
Set ON
If Output Sys_Ret_Pump = OFF Then OFF
If Power Apex Off 002 Then ON
Defer 002:00 Then ON
Here is my problem. It doesn't work! lol. As soon as power is restored the skimmer overflows (when set to on line 4) or never comes back on when set to off (line 4).
1. If the main system pump is off then the skimmer should be too, once the main system pump is running the skimmer should turn on 2 minutes after the main system pump is back on.
2. If power is lost, turn the skimmer back on 2 min after power is restored.
This is what I have programmed for the skimmer input:
Fallback OFF
Set ON
If Output Sys_Ret_Pump = OFF Then OFF
If Power Apex Off 002 Then ON
Defer 002:00 Then ON
Here is my problem. It doesn't work! lol. As soon as power is restored the skimmer overflows (when set to on line 4) or never comes back on when set to off (line 4).